Open MPI logo

Portable Hardware Locality (hwloc) Documentation: v1.3.3

  |   Home   |   Support   |   FAQ   |  
CPU binding

Enumerations

enum  hwloc_cpubind_flags_t { HWLOC_CPUBIND_PROCESS, HWLOC_CPUBIND_THREAD, HWLOC_CPUBIND_STRICT, HWLOC_CPUBIND_NOMEMBIND }
 

Functions

int hwloc_set_cpubind (hwloc_topology_t topology, hwloc_const_cpuset_t set, int flags)
 
int hwloc_get_cpubind (hwloc_topology_t topology, hwloc_cpuset_t set, int flags)
 
int hwloc_set_proc_cpubind (hwloc_topology_t topology, hwloc_pid_t pid, hwloc_const_cpuset_t set, int flags)
 
int hwloc_get_proc_cpubind (hwloc_topology_t topology, hwloc_pid_t pid, hwloc_cpuset_t set, int flags)
 
int hwloc_set_thread_cpubind (hwloc_topology_t topology, hwloc_thread_t thread, hwloc_const_cpuset_t set, int flags)
 
int hwloc_get_thread_cpubind (hwloc_topology_t topology, hwloc_thread_t thread, hwloc_cpuset_t set, int flags)
 
int hwloc_get_last_cpu_location (hwloc_topology_t topology, hwloc_cpuset_t set, int flags)
 
int hwloc_get_proc_last_cpu_location (hwloc_topology_t topology, hwloc_pid_t pid, hwloc_cpuset_t set, int flags)
 

Detailed Description

It is often useful to call hwloc_bitmap_singlify() first so that a single CPU remains in the set. This way, the process will not even migrate between different CPUs. Some operating systems also only support that kind of binding.

Note
Some operating systems do not provide all hwloc-supported mechanisms to bind processes, threads, etc. and the corresponding binding functions may fail. -1 is returned and errno is set to ENOSYS when it is not possible to bind the requested kind of object processes/threads. errno is set to EXDEV when the requested cpuset can not be enforced (e.g. some systems only allow one CPU, and some other systems only allow one NUMA node).

The most portable version that should be preferred over the others, whenever possible, is

hwloc_set_cpubind(topology, set, 0),

as it just binds the current program, assuming it is single-threaded, or

which binds the current thread of the current program (which may be multithreaded).

Note
To unbind, just call the binding function with either a full cpuset or a cpuset equal to the system cpuset.
On some operating systems, CPU binding may have effects on memory binding, see HWLOC_CPUBIND_NOMEMBIND

Running lstopo –top can be a very convenient tool to check how binding actually happened.

Enumeration Type Documentation

Process/Thread binding flags.

These bit flags can be used to refine the binding policy.

The default (0) is to bind the current process, assumed to be single-threaded, in a non-strict way. This is the most portable way to bind as all operating systems usually provide it.

Note
Not all systems support all kinds of binding. See the "Detailed Description" section of CPU binding for a description of errors that can occur.
Enumerator
HWLOC_CPUBIND_PROCESS 

Bind all threads of the current (possibly) multithreaded process.

HWLOC_CPUBIND_THREAD 

Bind current thread of current process.

HWLOC_CPUBIND_STRICT 

Request for strict binding from the OS.

By default, when the designated CPUs are all busy while other CPUs are idle, operating systems may execute the thread/process on those other CPUs instead of the designated CPUs, to let them progress anyway. Strict binding means that the thread/process will _never_ execute on other cpus than the designated CPUs, even when those are busy with other tasks and other CPUs are idle.

Note
Depending on the operating system, strict binding may not be possible (e.g., the OS does not implement it) or not allowed (e.g., for an administrative reasons), and the function will fail in that case.

When retrieving the binding of a process, this flag checks whether all its threads actually have the same binding. If the flag is not given, the binding of each thread will be accumulated.

Note
This flag is meaningless when retrieving the binding of a thread.
HWLOC_CPUBIND_NOMEMBIND 

Avoid any effect on memory binding.

On some operating systems, some CPU binding function would also bind the memory on the corresponding NUMA node. It is often not a problem for the application, but if it is, setting this flag will make hwloc avoid using OS functions that would also bind memory. This will however reduce the support of CPU bindings, i.e. potentially return -1 with errno set to ENOSYS in some cases.

This flag is only meaningful when used with functions that set the CPU binding. It is ignored when used with functions that get CPU binding information.

Function Documentation

int hwloc_get_cpubind ( hwloc_topology_t  topology,
hwloc_cpuset_t  set,
int  flags 
)

Get current process or thread binding.

Writes into set the physical cpuset which the process or thread (according to flags) was last bound to.

int hwloc_get_last_cpu_location ( hwloc_topology_t  topology,
hwloc_cpuset_t  set,
int  flags 
)

Get the last physical CPU where the current process or thread ran.

The operating system may move some tasks from one processor to another at any time according to their binding, so this function may return something that is already outdated.

int hwloc_get_proc_cpubind ( hwloc_topology_t  topology,
hwloc_pid_t  pid,
hwloc_cpuset_t  set,
int  flags 
)

Get the current physical binding of process pid.

Note
hwloc_pid_t is pid_t on Unix platforms, and HANDLE on native Windows platforms.
HWLOC_CPUBIND_THREAD can not be used in flags.
As a special case on Linux, if a tid (thread ID) is supplied instead of a pid (process ID), the binding for that specific thread is returned.
int hwloc_get_proc_last_cpu_location ( hwloc_topology_t  topology,
hwloc_pid_t  pid,
hwloc_cpuset_t  set,
int  flags 
)

Get the last physical CPU where a process ran.

The operating system may move some tasks from one processor to another at any time according to their binding, so this function may return something that is already outdated.

Note
hwloc_pid_t is pid_t on Unix platforms, and HANDLE on native Windows platforms.
HWLOC_CPUBIND_THREAD can not be used in flags.
As a special case on Linux, if a tid (thread ID) is supplied instead of a pid (process ID), the binding for that specific thread is returned.
int hwloc_get_thread_cpubind ( hwloc_topology_t  topology,
hwloc_thread_t  thread,
hwloc_cpuset_t  set,
int  flags 
)

Get the current physical binding of thread tid.

Note
hwloc_thread_t is pthread_t on Unix platforms, and HANDLE on native Windows platforms.
HWLOC_CPUBIND_PROCESS can not be used in flags.
int hwloc_set_cpubind ( hwloc_topology_t  topology,
hwloc_const_cpuset_t  set,
int  flags 
)

Bind current process or thread on cpus given in physical bitmap set.

Returns
-1 with errno set to ENOSYS if the action is not supported
-1 with errno set to EXDEV if the binding cannot be enforced
int hwloc_set_proc_cpubind ( hwloc_topology_t  topology,
hwloc_pid_t  pid,
hwloc_const_cpuset_t  set,
int  flags 
)

Bind a process pid on cpus given in physical bitmap set.

Note
hwloc_pid_t is pid_t on Unix platforms, and HANDLE on native Windows platforms.
HWLOC_CPUBIND_THREAD can not be used in flags.
int hwloc_set_thread_cpubind ( hwloc_topology_t  topology,
hwloc_thread_t  thread,
hwloc_const_cpuset_t  set,
int  flags 
)

Bind a thread thread on cpus given in physical bitmap set.

Note
hwloc_thread_t is pthread_t on Unix platforms, and HANDLE on native Windows platforms.
HWLOC_CPUBIND_PROCESS can not be used in flags.