Is it possible your EC2 cluster has another "unknown" crappy Ethernet card(e.g. 1Gb
Thanks for your reply!I'm using TCP BTL because I don't have any other option in Amazon with 10 Gbit Ethernet.I also tried with MPICH2 1.4 and I got 60 microseconds...so I am very confused about it...Regarding hyperthreading and process binding settings...I am using only one MPI process in each node (2 nodes for a clasical ping-pong latency benchmark). I don't know how it could affect on this test...but I could try anything that anyone suggest to me--2012/1/12 Jeff Squyres <firstname.lastname@example.org>Hi Roberto.
We've had strange reports of performance from EC2 before; it's actually been on my to-do list to go check this out in detail. I made contact with the EC2 folks at Supercomputing late last year. They've hooked me up with some credits on EC2 to go check out what's happening, but the pent-up email deluge from the Christmas vacation and my travel to the MPI Forum this week prevented me from testing yet.
I hope to be able to get time to test Open MPI on EC2 next week and see what's going on.
It's very strange to me that Open MPI is getting *better* than raw TCP performance. I don't have an immediate explanation for that -- if you're using the TCP BTL, then OMPI should be using TCP sockets, just like netpipe and the others.
You *might* want to check hyperthreading and process binding settings in all your tests.
On Jan 12, 2012, at 7:04 AM, Roberto Rey wrote:
> Hi again,
> Today I was trying with another TCP benchmark included in the hpcbench suite, and with a ping-pong test I'm also getting 100us of latency. Then, I tried with netperf and the same result....
> So, in summary, I'm measuring TCP latency with messages size between 1-32 bytes:
> Netperf over TCP -> 100us
> Netpipe over TCP (NPtcp) -> 100us
> HPCbench over TCP -> 100us
> Netpipe over OpenMPI (NPmpi) -> 60us
> HPCBench over OpenMPI -> 60us
> Any clues?
> Thanks a lot!
> 2012/1/10 Roberto Rey <email@example.com>
> I'm running some tests on EC2 cluster instances with 10 Gigabit Ethernet hardware and I'm getting strange latency results with Netpipe and OpenMPI.
> If I run Netpipe over OpenMPI (NPmpi) I get a network latency around 60 microseconds for small messages (less than 2kbytes). However, when I run Netpipe over TCP (NPtcp) I always get around 100 microseconds. For bigger messages everything seems to be OK.
> I'm using the BTL TCP in OpenMPI, so I can't understand why OpenMPI outperforms raw TCP performance for small messages (40us of difference). I also have run the PingPong test from the Intel Media Benchmarks and the latency results for OpenMPI are very similar (60us) to those obtained with NPmpi
> Can OpenMPI outperform Netpipe over TCP? Why? Is OpenMPI doing any optimization in BTL TCP?
> The results for OpenMPI aren't so good but we must take into account the network virtualization overhead under Xen
> Thanks for your reply
> Roberto Rey Expósito
> users mailing list
For corporate legal information go to:
users mailing list
Roberto Rey Expósito
users mailing list