I re-ran with 1 processor and got more information. How about this?

 

Core was generated by `ring_c'.

Program terminated with signal 11, Segmentation fault.

#0  opal_memory_ptmalloc2_int_malloc (av=0x2b48f6300020, bytes=47592367980728) at ../../../../../openmpi-1.8.1/opal/mca/memory/linux/malloc.c:4098

4098          bck->fd = unsorted_chunks(av);

(gdb) bt

#0  opal_memory_ptmalloc2_int_malloc (av=0x2b48f6300020, bytes=47592367980728) at ../../../../../openmpi-1.8.1/opal/mca/memory/linux/malloc.c:4098

#1  0x00002b48f2a15e38 in opal_memory_ptmalloc2_malloc (bytes=47592367980576) at ../../../../../openmpi-1.8.1/opal/mca/memory/linux/malloc.c:3433

#2  0x00002b48f2a15b36 in opal_memory_linux_malloc_hook (sz=47592367980576, caller=0x2b48f63000b8) at ../../../../../openmpi-1.8.1/opal/mca/memory/linux/hooks.c:691

#3  0x00002b48f2374b90 in vasprintf () from /lib64/libc.so.6

#4  0x00002b48f2354148 in asprintf () from /lib64/libc.so.6

#5  0x00002b48f26dc7d1 in orte_oob_base_get_addr (uri=0x2b48f6300020) at ../../../../openmpi-1.8.1/orte/mca/oob/base/oob_base_stubs.c:234

#6  0x00002b48f53e7d4a in orte_rml_oob_get_uri () at ../../../../../openmpi-1.8.1/orte/mca/rml/oob/rml_oob_contact.c:36

#7  0x00002b48f26fa181 in orte_routed_base_register_sync (setup=32 ' ') at ../../../../openmpi-1.8.1/orte/mca/routed/base/routed_base_fns.c:301

#8  0x00002b48f4bbcccf in init_routes (job=4130340896, ndat=0x2b48f63000b8) at ../../../../../openmpi-1.8.1/orte/mca/routed/binomial/routed_binomial.c:705

#9  0x00002b48f26c615d in orte_ess_base_app_setup (db_restrict_local=32 ' ') at ../../../../openmpi-1.8.1/orte/mca/ess/base/ess_base_std_app.c:245

#10 0x00002b48f45b069f in rte_init () at ../../../../../openmpi-1.8.1/orte/mca/ess/env/ess_env_module.c:146

#11 0x00002b48f26935ab in orte_init (pargc=0x2b48f6300020, pargv=0x2b48f63000b8, flags=8) at ../../openmpi-1.8.1/orte/runtime/orte_init.c:148

#12 0x00002b48f1739d38 in ompi_mpi_init (argc=1, argv=0x7fffebf0d1f8, requested=8, provided=0x0) at ../../openmpi-1.8.1/ompi/runtime/ompi_mpi_init.c:464

#13 0x00002b48f1760a37 in PMPI_Init (argc=0x2b48f6300020, argv=0x2b48f63000b8) at pinit.c:84

#14 0x00000000004024ef in main (argc=1, argv=0x7fffebf0d1f8) at ring_c.c:19

 

From: users [mailto:users-bounces@open-mpi.org] On Behalf Of Ralph Castain
Sent: Wednesday, June 04, 2014 11:00 AM
To: Open MPI Users
Subject: Re: [OMPI users] intermittent segfaults with openib on ring_c.c

 

Does the trace go any further back? Your prior trace seemed to indicate an error in our OOB framework, but in a very basic place. Looks like it could be an uninitialized variable, and having the line number down as deep as possible might help identify the source

 

 

On Jun 4, 2014, at 7:55 AM, Fischer, Greg A. <fischega@westinghouse.com> wrote:



Oops, ulimit was set improperly. I generated a core file, loaded it in GDB, and ran a backtrace:

 

Core was generated by `ring_c'.

Program terminated with signal 11, Segmentation fault.

#0  opal_memory_ptmalloc2_int_malloc (av=0x2b8e4fd00020, bytes=47890224382136) at ../../../../../openmpi-1.8.1/opal/mca/memory/linux/malloc.c:4098

4098          bck->fd = unsorted_chunks(av);

(gdb) bt

#0  opal_memory_ptmalloc2_int_malloc (av=0x2b8e4fd00020, bytes=47890224382136) at ../../../../../openmpi-1.8.1/opal/mca/memory/linux/malloc.c:4098

#1  0x0000000000000000 in ?? ()

 

Is that helpful?

 

Greg

 

From: Fischer, Greg A. 
Sent: Wednesday, June 04, 2014 10:17 AM
To: 'Open MPI Users'
Cc: Fischer, Greg A.
Subject: RE: [OMPI users] intermittent segfaults with openib on ring_c.c

 

I recompiled with “—enable-debug” but it doesn’t seem to be providing any more information or a core dump. I’m compiling ring.c with:

 

mpicc ring_c.c -g -traceback -o ring_c

 

and running with:

 

mpirun -np 4 --mca btl openib,self ring_c

 

and I’m getting:

 

[binf112:05845] *** Process received signal ***

[binf112:05845] Signal: Segmentation fault (11)

[binf112:05845] Signal code: Address not mapped (1)

[binf112:05845] Failing at address: 0x10

[binf112:05845] [ 0] /lib64/libpthread.so.0(+0xf7c0)[0x2b2fa44d57c0]

[binf112:05845] [ 1] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libopen-pal.so.6(opal_memory_ptmalloc2_int_malloc+0x4b3)[0x2b2fa4ff2b03]

[binf112:05845] [ 2] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libopen-pal.so.6(opal_memory_ptmalloc2_malloc+0x58)[0x2b2fa4ff5288]

[binf112:05845] [ 3] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libopen-pal.so.6(+0xd1f86)[0x2b2fa4ff4f86]

[binf112:05845] [ 4] /lib64/libc.so.6(vasprintf+0x3e)[0x2b2fa4957a7e]

[binf112:05845] [ 5] /lib64/libc.so.6(asprintf+0x88)[0x2b2fa4937148]

[binf112:05845] [ 6] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libopen-rte.so.7(orte_util_convert_process_name_to_string+0xe2)[0x2b2fa4c873e2]

[binf112:05845] [ 7] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libopen-rte.so.7(orte_oob_base_get_addr+0x25)[0x2b2fa4cbdb15]

[binf112:05845] [ 8] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/openmpi/mca_rml_oob.so(orte_rml_oob_get_uri+0xa)[0x2b2fa79c5d2a]

[binf112:05845] [ 9] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libopen-rte.so.7(orte_routed_base_register_sync+0x1fd)[0x2b2fa4cdae7d]

[binf112:05845] [10] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/openmpi/mca_routed_binomial.so(+0x3c7b)[0x2b2fa719bc7b]

[binf112:05845] [11] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libopen-rte.so.7(orte_ess_base_app_setup+0x3ad)[0x2b2fa4ca7c8d]

[binf112:05845] [12] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/openmpi/mca_ess_env.so(+0x169f)[0x2b2fa6b8f69f]

[binf112:05845] [13] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libopen-rte.so.7(orte_init+0x17b)[0x2b2fa4c764bb]

[binf112:05845] [14] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libmpi.so.1(ompi_mpi_init+0x438)[0x2b2fa3d1e198]

[binf112:05845] [15] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.8.1/lib/libmpi.so.1(MPI_Init+0xf7)[0x2b2fa3d44947]

[binf112:05845] [16] ring_c[0x4024ef]

[binf112:05845] [17] /lib64/libc.so.6(__libc_start_main+0xe6)[0x2b2fa4906c36]

[binf112:05845] [18] ring_c[0x4023f9]

[binf112:05845] *** End of error message ***

--------------------------------------------------------------------------

mpirun noticed that process rank 3 with PID 5845 on node xxxx112 exited on signal 11 (Segmentation fault).

--------------------------------------------------------------------------

 

Does any of that help?

 

Greg

 

From: users [mailto:users-bounces@open-mpi.org] On Behalf Of Ralph Castain
Sent: Tuesday, June 03, 2014 11:54 PM
To: Open MPI Users
Subject: Re: [OMPI users] intermittent segfaults with openib on ring_c.c

 

Sounds odd - can you configure OMPI --enable-debug and run it again? If it fails and you can get a core dump, could you tell us the line number where it is failing?

 

 

On Jun 3, 2014, at 9:58 AM, Fischer, Greg A. <fischega@westinghouse.com> wrote:

 

Apologies – I forgot to add some of the information requested by the FAQ:

 

1.       OpenFabrics is provided by the Linux distribution:

[binf102:fischega] $ rpm -qa | grep ofed
ofed-kmp-default-1.5.4.1_3.0.76_0.11-0.11.5
ofed-1.5.4.1-0.11.5
ofed-doc-1.5.4.1-0.11.5


2.       Linux Distro / Kernel:

[binf102:fischega] $ cat /etc/SuSE-release
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 3

[binf102:fischega] $ uname –a
Linux xxxx102 3.0.76-0.11-default #1 SMP Fri Jun 14 08:21:43 UTC 2013 (ccab990) x86_64 x86_64 x86_64 GNU/Linux


3.       Not sure which subnet manger is being used – I think OpenSM, but I’ll need to check with my administrators.


4.       Output of ibv_devinfo is attached.


5.       Ifconfig output is attached.


6.       Ulimit –l output:

[binf102:fischega] $ ulimit –l
unlimited

 

Greg


From: Fischer, Greg A. 
Sent: Tuesday, June 03, 2014 12:38 PM
To: Open MPI Users
Cc: Fischer, Greg A.
Subject: intermittent segfaults with openib on ring_c.c

 

Hello openmpi-users,

 

I’m running into a perplexing problem on a new system, whereby I’m experiencing intermittent segmentation faults when I run the ring_c.c example and use the openib BTL. See an example below. Approximately 50% of the time it provides the expected output, but the other 50% of the time, it segfaults. LD_LIBRARY_PATH is set correctly, and the version of “mpirun” being invoked is correct. The output of ompi_info –all is attached.

 

One potential problem may be that the system that OpenMPI was compiled on is mostly the same as the system where it is being executed, but there are some differences in the installed packages. I’ve checked the critical ones (libibverbs, librdmacm, libmlx4-rdmav2, etc.), and they appear to be the same.

 

Can anyone suggest how I might start tracking this problem down?

 

Thanks,

Greg

 

[binf102:fischega] $ mpirun -np 2 --mca btl openib,self ring_c

[binf102:31268] *** Process received signal ***

[binf102:31268] Signal: Segmentation fault (11)

[binf102:31268] Signal code: Address not mapped (1)

[binf102:31268] Failing at address: 0x10

[binf102:31268] [ 0] /lib64/libpthread.so.0(+0xf7c0) [0x2b42213f57c0]

[binf102:31268] [ 1] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.6.5/lib/libmpi.so.1(opal_memory_ptmalloc2_int_malloc+0x4b3) [0x2b42203fd7e3]

[binf102:31268] [ 2] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.6.5/lib/libmpi.so.1(opal_memory_ptmalloc2_int_memalign+0x8b) [0x2b4220400d3b]

[binf102:31268] [ 3] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.6.5/lib/libmpi.so.1(opal_memory_ptmalloc2_memalign+0x6f) [0x2b42204008ef]

[binf102:31268] [ 4] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.6.5/lib/libmpi.so.1(+0x117876) [0x2b4220400876]

[binf102:31268] [ 5] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.6.5/lib/openmpi/mca_btl_openib.so(+0xc34c) [0x2b422572334c]

[binf102:31268] [ 6] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.6.5/lib/libmpi.so.1(opal_class_initialize+0xaa) [0x2b422041d64a]

[binf102:31268] [ 7] /xxxx/yyyy_ib/intel-12.1.0.233/toolset/openmpi-1.6.5/lib/openmpi/mca_btl_openib.so(+0x1f12f) [0x2b422573612f]

[binf102:31268] [ 8] /lib64/libpthread.so.0(+0x77b6) [0x2b42213ed7b6]

[binf102:31268] [ 9] /lib64/libc.so.6(clone+0x6d) [0x2b42216dcd6d]

[binf102:31268] *** End of error message ***

--------------------------------------------------------------------------

mpirun noticed that process rank 0 with PID 31268 on node xxxx102 exited on signal 11 (Segmentation fault).

--------------------------------------------------------------------------

<ibv_devinfo.txt><ifconfig.txt>_______________________________________________
users mailing list
users@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users

 

_______________________________________________
users mailing list
users@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users