Thanks again for your support. But i have no the highest authority of root. What can i do?
At 2011-09-16 19:44:57,"Jeff Squyres" <jsquyres@cisco.com> wrote:
>The problem is highlighted in the configure output:
>
>>> checking whether build environment is sane... configure: error: newly created file is older than distributed files!
>>> Check your system clock
>
>Don't use touch. Fix your system clock and re-untar the Open MPI tarball. Then configure will work fine.
>
>
>
>On Sep 16, 2011, at 7:22 AM, ºÂÎÄƽ wrote:
>
>>
>> Thank you for your reply.Before I configured OPENMPI,I used the commond "touch * ". It did work. But i think the mistake is that: "configure: error: Failed to build GNU libltdl. This usually means that something is incorrectly setup with your environment. There may be useful information in opal/libltdl/config.log. You can also disable GNU libltdl (which will disable
>> dynamic shared object loading) by configuring with --disable-dlopen." Hope your comments.
>> Thanks!
>>
>>
>> At 2011-09-15 20:11:22,"Jeff Squyres (jsquyres)" <jsquyres@cisco.com> wrote:
>> OMPI 1.2.6 is fairly ancient; you might want to upgrade.
>>
>> The problem is your systems clock. Set it properly and configure should be ok.
>>
>> Sent from my phone. No type good.
>>
>> On Sep 14, 2011, at 11:21 PM, ºÂÎÄƽ <hwp22651304@163.com> wrote:
>>
>>> Hello,
>>> When i try to compile openmpi-1.2.6.tar.bz2 on my computer with ifort Compilier.My system is Red Hat4.6 86x64.But some mistakes happen when the process of configuring.Mistakes as follows:
>>> $./configure --prefix=~/haowp/opt/openmpi FC=ifort F90=ifort
>>> .........
>>> ......
>>> *** GNU libltdl setup
>>> configure: OMPI configuring in opal/libltdl
>>> configure: running /bin/sh './configure' '--prefix=/stg/s1p1/users/yuanjm/haowp/opt/openmpi' 'FC=ifort' 'F90=ifort' --enable-ltdl-convenience --disable-ltdl-install --enable-shared --disable-static --cache-file=/dev/null --srcdir=.
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking whether build environment is sane... configure: error: newly created file is older than distributed files!
>>> Check your system clock
>>> configure: /bin/sh './configure' *failed* for opal/libltdl
>>> configure: error: Failed to build GNU libltdl. This usually means that something
>>> is incorrectly setup with your environment. There may be useful information in
>>> opal/libltdl/config.log. You can also disable GNU libltdl (which will disable
>>> dynamic shared object loading) by configuring with --disable-dlopen.
>>>
>>> $vi /opml/libltdl/config.log
>>> ## ----------- ##
>>> ## confdefs.h. ##
>>> ## ----------- ##
>>> #define PACKAGE_NAME "libltdl"
>>> #define PACKAGE_TARNAME "libltdl"
>>> #define PACKAGE_VERSION "2.1a"
>>> #define PACKAGE_STRING "libltdl 2.1a"
>>> #define PACKAGE_BUGREPORT "bug-libtool@gnu.org"
>>> configure: exit 1
>>> Thank you for your attention.Hope your reply.
>>>
>>>
>>>
>>>
>>> haowp
>>> Sep.15.2011
>>>
>>>
>>>
>>>
>>> At 2011-09-15 00:32:32,"Ralph Castain" <rhc@open-mpi.org
>>> > wrote:
>>> >
>>> >On Sep 14, 2011, at 9:39 AM, Blosch, Edwin L wrote:
>>> >
>>> >> Thanks, Ralph,
>>> >>
>>> >> I get the failure messages, unfortunately:
>>> >>
>>> >> setgid FAILED
>>> >> setgid FAILED
>>> >> setgid FAILED
>>> >>
>>> >> I actually had attempted to call setgid from within the application previously, which looks similar to what you've done, but it failed. That was when I initiated the post to the mailing list. My conclusion, a guess really, was that Linux would not let me setgid from within my program because I was not root.
>>> >
>>> >I was afraid of that - the documentation seemed to indicate that would be the case, but I figured it was worth a quick try. Sorry I can't be of help.
>>> >
>>> >
>>> >>
>>> >>
>>> >> -----Original Message-----
>>> >> From:
>>> users-bounces@open-mpi.org [mailto:users-bounces@open-mpi.org
>>> ] On Behalf Of Ralph Castain
>>> >> Sent: Wednesday, September 14, 2011 8:15 AM
>>> >> To: Open MPI Users
>>> >> Subject: Re: [OMPI users] EXTERNAL: Re: Can you set the gid of the processes created by mpirun?
>>> >>
>>> >> The attached should set the gid of the remote daemons (and their children) to the gid of mpirun. No cmd line option or anything is required - it will just always do it.
>>> >>
>>> >> Would you mind giving it a try?
>>> >>
>>> >> Please let me know if/how it works.
>>> >>
>>> >> _______________________________________________
>>> >> users mailing list
>>> >>
>>> users@open-mpi.org
>>>
>>> >>
>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>
>>> >
>>> >
>>> >_______________________________________________
>>> >users mailing list
>>> >
>>> users@open-mpi.org
>>>
>>> >
>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>
>>>
>>> _______________________________________________
>>> users mailing list
>>> users@open-mpi.org
>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>
>>
>> _______________________________________________
>> users mailing list
>> users@open-mpi.org
>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>
>
>--
>Jeff Squyres
>jsquyres@cisco.com
>For corporate legal information go to:
>http://www.cisco.com/web/about/doing_business/legal/cri/
>
>
>_______________________________________________
>users mailing list
>users@open-mpi.org
>http://www.open-mpi.org/mailman/listinfo.cgi/users