Open MPI logo

Open MPI User's Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Open MPI User's mailing list

Subject: Re: [OMPI users] -Re Post- MPI_SUM is not defined on the MPI_INTEGER datatype
From: mohamed khuili (khuilimohamed_at_[hidden])
Date: 2013-05-28 10:08:05


My operating system is opensuse 12.3 X86_64 I use openmpi is 1.6-3.1.2
the message is
Open RTE was unable to open the hostfile:
    /usr/lib64/mpi/gcc/openmpi/etc/openmpi-default-hostfile
Check to make sure the path and filename are correct.
--------------------------------------------------------------------------
[linux-mwmw.site:01535] [[25215,0],0] ORTE_ERROR_LOG: Not found in file
base/ras_base_allocate.c at line 200
[linux-mwmw.site:01535] [[25215,0],0] ORTE_ERROR_LOG: Not found in file
base/plm_base_launch_support.c at line 99
[linux-mwmw.site:01535] [[25215,0],0] ORTE_ERROR_LOG: Not found in file
plm_rsh_module.c at line 1167

2013/5/28 Jeff Squyres (jsquyres) <jsquyres_at_[hidden]>

> Per the email that you forwarded below, I replied to you off list saying
> that we could figure it out without bothering people, and then post the
> final resolution back to the list (I do this sometimes when figuring out a
> problem is going to take a bunch of back-and-forth). On May 25th, I
> replied to your mail asking for more information that you did not provide.
>
> Do you want to go reply to that mail from May 25?
>
>
>
> On May 27, 2013, at 7:05 AM, Hayato KUNIIE <kuni255_at_[hidden]>
> wrote:
>
> > Hello
> >
> > I posted this topic in last week.
> > But Information about this problem was few.
> > And I post again with more information.
> >
> > I build bewulf type PC Cluster (Cent OS release 6.4). And I studing
> > about MPI.(Open MPI Ver.1.6.4) I tried following sample which using
> > MPI_REDUCE (FORTRAN).
> >
> > Then, following Error occured.
> > --------------------------------------
> > [bwslv01:30793] *** An error occurred in MPI_Reduce: the reduction
> > operation MPI_SUM is not defined on the MPI_INTEGER datatype
> > [bwslv01:30793] *** on communicator MPI_COMM_WORLD
> > [bwslv01:30793] *** MPI_ERR_OP: invalid reduce operation
> > [bwslv01:30793] *** MPI_ERRORS_ARE_FATAL: your MPI job will now abort
> > -------------------------------------- All informaion is showd in
> attached file err.log. and source file is attached as main.f
> >
> > This cluster system consist of one head node and 2 slave nodes.
> > And sharing home directory in head node by NFS. so Open MPI is installed
> > each nodes.
> >
> > When I test this program on only head node, program is run correctly.
> > and output result.
> > But When I test this program on only slave node, same error occured.
> >
> > Please tell me, good idea or advise.
> >
> > Other information is included attached file.
> > Following is construction of directories .
> > ompiReport
> > ├── head
> > │ ├── config.log // Item 3 on help page
> > │ ├── ifocnfig.txt // Item 8 on help page
> > │ ├── lstopo.txt // Item 5 on help page
> > | |---- PATH.txt // Item 7 on help page
> > | |---- LD_LIBRARY_PATH.txt // Item 7 on help page
> > │ └── ompi_info_all.txt // Item 4 on help page
> > ├── ompi_info_full.txt // Item 6 on help page
> > |---- main.f // source file
> > |---- err.log // error message
> > ├── slv01
> > │ ├── config.log // Item 3 on help page
> > │ ├── ifconfig.txt // Item 8 on help page
> > │ ├── lstopo.txt // Item 5 on help page
> > | |---- PATH.txt // Item 7 on help page
> > | |---- LD_LIBRARY_PATH.txt // Item 7 on help page
> > │ └── ompi_info_all.txt // Item 4 on help page
> > └── slv02
> > ├── config.log // Item 3 on help page
> > ├── ifconfig.txt // Item 8 on help page
> > ├── lstopo.txt // Item 5 on help page
> > |---- PATH.txt // Item 7 on help page
> > |---- LD_LIBRARY_PATH.txt // Item 7 on help page
> > └── ompi_info_all.txt // Item 4 on help page
> >
> > 3 directories, 13 files
> >
> > Best regards
> >
> >
> >
> > (2013/05/16 23:24), Jeff Squyres (jsquyres) wrote:
> >> (OFF LIST)
> >>
> >> Let's figure this out off-list and post the final resolution back to
> the list.
> >>
> >> This is quite odd.
> >>
> >> You launched this mpirun from a single node, right? I'm trying to make
> sure that you're doing non-interactive logins on the remote nodes to find
> the ompi_info's, because sometimes there's a difference between paths that
> are set for interactive and non-interactive logins.
> >>
> >> Can you send all the information listed here:
> >>
> >> http://www.open-mpi.org/community/help/
> >>
> >>
> >>
> >> On May 16, 2013, at 9:53 AM, Hayato KUNIIE <kuni255_at_[hidden]>
> wrote:
> >>
> >>> Following is result of mpirun ompi_info on three_nodes.
> >>>
> >>> three nodes version is same.
> >>>
> >>> Package: Open MPI root_at_bwhead.clnet Distribution Open MPI
> root_at_bwslv01 Distribution Open MPI root_at_bwslv02 Distribution
> >>> Open MPI: 1.6.4 1.6.4 1.6.4
> >>> Open MPI SVN revision: r28081 r28081 r28081
> >>> Open MPI release date: Feb 19, 2013 Feb 19, 2013 Feb 19, 2013
> >>> Open RTE: 1.6.4 1.6.4 1.6.4
> >>> Open RTE SVN revision: r28081 r28081 r28081
> >>> Open RTE release date: Feb 19, 2013 Feb 19, 2013 Feb 19, 2013
> >>> OPAL: 1.6.4 1.6.4 1.6.4
> >>> OPAL SVN revision: r28081 r28081 r28081
> >>> OPAL release date: Feb 19, 2013 Feb 19, 2013 Feb 19, 2013
> >>> MPI API: 2.1 2.1 2.1
> >>> Ident string: 1.6.4 1.6.4 1.6.4
> >>> Prefix: /usr/local /usr/local /usr/local
> >>> Configured architecture: x86_64-unknown-linux-gnu
> x86_64-unknown-linux-gnu x86_64-unknown-linux-gnu
> >>> Configure host: bwhead.clnet bwslv01 bwslv02
> >>> Configured by: root root root
> >>> Configured on: Wed May 8 20:38:14 JST 2013 45 JST 2013 29 JST 2013
> >>> Configure host: bwhead.clnet bwslv01 bwslv02
> >>> Built by: root root root
> >>> Built on: Wed May 8 20:48:44 JST 2013 43 JST 2013 38 JST 2013
> >>> Built host: bwhead.clnet bwslv01 bwslv02
> >>> C bindings: yes yes yes
> >>> C++ bindings: yes yes yes
> >>> Fortran77 bindings: yes (all) yes (all) yes (all)
> >>> Fortran90 bindings: yes yes yes
> >>> Fortran90 bindings size: small small small
> >>> C compiler: gcc gcc gcc
> >>> C compiler absolute: /usr/bin/gcc /usr/bin/gcc /usr/bin/gcc
> >>> C compiler family name: GNU GNU GNU
> >>> C compiler version: 4.4.7 4.4.7 4.4.7
> >>> C++ compiler: g++ g++ g++
> >>> C++ compiler absolute: /usr/bin/g++ /usr/bin/g++ /usr/bin/g++
> >>> Fortran77 compiler: gfortran gfortran gfortran
> >>> Fortran77 compiler abs: /usr/bin/gfortran /usr/bin/gfortran
> /usr/bin/gfortran
> >>> Fortran90 compiler: gfortran gfortran gfortran
> >>> Fortran90 compiler abs: /usr/bin/gfortran /usr/bin/gfortran
> /usr/bin/gfortran
> >>> C profiling: yes yes yes
> >>> C++ profiling: yes yes yes
> >>> Fortran77 profiling: yes yes yes
> >>> Fortran90 profiling: yes yes yes
> >>> C++ exceptions: no no no
> >>> Thread support: posix (MPI_THREAD_MULTIPLE: no, progress: no) no) no)
> >>> Sparse Groups: no no no
> >>> Internal debug support: no no no
> >>> MPI interface warnings: no no no
> >>> MPI parameter check: runtime runtime runtime
> >>> Memory profiling support: no no no
> >>> Memory debugging support: no no no
> >>> libltdl support: yes yes yes
> >>> Heterogeneous support: no no no
> >>> mpirun default --prefix: no no no
> >>> MPI I/O support: yes yes yes
> >>> MPI_WTIME support: gettimeofday gettimeofday gettimeofday
> >>> Symbol vis. support: yes yes yes
> >>> Host topology support: yes yes yes
> >>> MPI extensions: affinity example affinity example affinity example
> >>> FT Checkpoint support: no (checkpoint thread: no) no) no)
> >>> VampirTrace support: yes yes yes
> >>> MPI_MAX_PROCESSOR_NAME: 256 256 256
> >>> MPI_MAX_ERROR_STRING: 256 256 256
> >>> MPI_MAX_OBJECT_NAME: 64 64 64
> >>> MPI_MAX_INFO_KEY: 36 36 36
> >>> MPI_MAX_INFO_VAL: 256 256 256
> >>> MPI_MAX_PORT_NAME: 1024 1024 1024
> >>> MPI_MAX_DATAREP_STRING: 128 128 128
> >>> Package: Open MPI root_at_bwslv01 Distribution execinfo (MCA v2.0, API
> v2.0, Component v1.6.4) execinfo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open MPI: 1.6.4 linux (MCA v2.0, API v2.0, Component v1.6.4) linux
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open MPI SVN revision: r28081 hwloc (MCA v2.0, API v2.0, Component
> v1.6.4) hwloc (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open MPI release date: Feb 19, 2013 auto_detect (MCA v2.0, API v2.0,
> Component v1.6.4) auto_detect (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open RTE: 1.6.4 file (MCA v2.0, API v2.0, Component v1.6.4) file
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open RTE SVN revision: r28081 mmap (MCA v2.0, API v2.0, Component
> v1.6.4) mmap (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open RTE release date: Feb 19, 2013 posix (MCA v2.0, API v2.0,
> Component v1.6.4) posix (MCA v2.0, API v2.0, Component v1.6.4)
> >>> OPAL: 1.6.4 sysv (MCA v2.0, API v2.0, Component v1.6.4) sysv (MCA
> v2.0, API v2.0, Component v1.6.4)
> >>> OPAL SVN revision: r28081 first_use (MCA v2.0, API v2.0, Component
> v1.6.4) first_use (MCA v2.0, API v2.0, Component v1.6.4)
> >>> OPAL release date: Feb 19, 2013 hwloc (MCA v2.0, API v2.0, Component
> v1.6.4) hwloc (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI API: 2.1 linux (MCA v2.0, API v2.0, Component v1.6.4) linux (MCA
> v2.0, API v2.0, Component v1.6.4)
> >>> Ident string: 1.6.4 env (MCA v2.0, API v2.0, Component v1.6.4) env
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Prefix: /usr/local config (MCA v2.0, API v2.0, Component v1.6.4)
> config (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Configured architecture: x86_64-unknown-linux-gnu linux (MCA v2.0,
> API v2.0, Component v1.6.4) linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Configure host: bwslv01 hwloc132 (MCA v2.0, API v2.0, Component
> v1.6.4) hwloc132 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Configured by: root orte (MCA v2.0, API v2.0, Component v1.6.4) orte
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Configured on: Wed May 8 20:56:45 JST 2013 orte (MCA v2.0, API v2.0,
> Component v1.6.4) orte (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Configure host: bwslv01 basic (MCA v2.0, API v2.0, Component v1.6.4)
> basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Built by: root bucket (MCA v2.0, API v2.0, Component v1.6.4) bucket
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Built on: Wed May 8 21:05:43 JST 2013 basic (MCA v2.0, API v2.0,
> Component v1.6.4) basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Built host: bwslv01 hierarch (MCA v2.0, API v2.0, Component v1.6.4)
> hierarch (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C bindings: yes inter (MCA v2.0, API v2.0, Component v1.6.4) inter
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C++ bindings: yes self (MCA v2.0, API v2.0, Component v1.6.4) self
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Fortran77 bindings: yes (all) sm (MCA v2.0, API v2.0, Component
> v1.6.4) sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Fortran90 bindings: yes sync (MCA v2.0, API v2.0, Component v1.6.4)
> sync (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Fortran90 bindings size: small tuned (MCA v2.0, API v2.0, Component
> v1.6.4) tuned (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C compiler: gcc romio (MCA v2.0, API v2.0, Component v1.6.4) romio
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C compiler absolute: /usr/bin/gcc fake (MCA v2.0, API v2.0, Component
> v1.6.4) fake (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C compiler family name: GNU rdma (MCA v2.0, API v2.0, Component
> v1.6.4) rdma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C compiler version: 4.4.7 sm (MCA v2.0, API v2.0, Component v1.6.4)
> sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C++ compiler: g++ bfo (MCA v2.0, API v2.0, Component v1.6.4) bfo
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C++ compiler absolute: /usr/bin/g++ csum (MCA v2.0, API v2.0,
> Component v1.6.4) csum (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Fortran77 compiler: gfortran ob1 (MCA v2.0, API v2.0, Component
> v1.6.4) ob1 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Fortran77 compiler abs: /usr/bin/gfortran v (MCA v2.0, API v2.0,
> Component v1.6.4) v (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Fortran90 compiler: gfortran r2 (MCA v2.0, API v2.0, Component
> v1.6.4) r2 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Fortran90 compiler abs: /usr/bin/gfortran vma (MCA v2.0, API v2.0,
> Component v1.6.4) vma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C profiling: yes self (MCA v2.0, API v2.0, Component v1.6.4) self
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C++ profiling: yes sm (MCA v2.0, API v2.0, Component v1.6.4) sm (MCA
> v2.0, API v2.0, Component v1.6.4)
> >>> Fortran77 profiling: yes tcp (MCA v2.0, API v2.0, Component v1.6.4)
> tcp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Fortran90 profiling: yes unity (MCA v2.0, API v2.0, Component v1.6.4)
> unity (MCA v2.0, API v2.0, Component v1.6.4)
> >>> C++ exceptions: no pt2pt (MCA v2.0, API v2.0, Component v1.6.4) pt2pt
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Thread support: posix (MPI_THREAD_MULTIPLE: no, progress: no) rdma
> (MCA v2.0, API v2.0, Component v1.6.4) rdma (MCA v2.0, API v2.0, Component
> v1.6.4)
> >>> Sparse Groups: no hnp (MCA v2.0, API v2.0, Component v1.6.4) hnp
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Internal debug support: no orted (MCA v2.0, API v2.0, Component
> v1.6.4) orted (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI interface warnings: no tool (MCA v2.0, API v2.0, Component
> v1.6.4) tool (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI parameter check: runtime tcp (MCA v2.0, API v2.0, Component
> v1.6.4) tcp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Memory profiling support: no default (MCA v2.0, API v2.0, Component
> v1.6.4) default (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Memory debugging support: no cm (MCA v2.0, API v2.0, Component
> v1.6.4) cm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> libltdl support: yes loadleveler (MCA v2.0, API v2.0, Component
> v1.6.4) loadleveler (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Heterogeneous support: no slurm (MCA v2.0, API v2.0, Component
> v1.6.4) slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> mpirun default --prefix: no load_balance (MCA v2.0, API v2.0,
> Component v1.6.4) load_balance (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI I/O support: yes rank_file (MCA v2.0, API v2.0, Component v1.6.4)
> rank_file (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI_WTIME support: gettimeofday resilient (MCA v2.0, API v2.0,
> Component v1.6.4) resilient (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Symbol vis. support: yes round_robin (MCA v2.0, API v2.0, Component
> v1.6.4) round_robin (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Host topology support: yes seq (MCA v2.0, API v2.0, Component v1.6.4)
> seq (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI extensions: affinity example topo (MCA v2.0, API v2.0, Component
> v1.6.4) topo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> FT Checkpoint support: no (checkpoint thread: no) oob (MCA v2.0, API
> v2.0, Component v1.6.4) oob (MCA v2.0, API v2.0, Component v1.6.4)
> >>> VampirTrace support: yes binomial (MCA v2.0, API v2.0, Component
> v1.6.4) binomial (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI_MAX_PROCESSOR_NAME: 256 cm (MCA v2.0, API v2.0, Component v1.6.4)
> cm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI_MAX_ERROR_STRING: 256 direct (MCA v2.0, API v2.0, Component
> v1.6.4) direct (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI_MAX_OBJECT_NAME: 64 linear (MCA v2.0, API v2.0, Component v1.6.4)
> linear (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI_MAX_INFO_KEY: 36 radix (MCA v2.0, API v2.0, Component v1.6.4)
> radix (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI_MAX_INFO_VAL: 256 slave (MCA v2.0, API v2.0, Component v1.6.4)
> slave (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI_MAX_PORT_NAME: 1024 rsh (MCA v2.0, API v2.0, Component v1.6.4)
> rsh (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI_MAX_DATAREP_STRING: 128 slurm (MCA v2.0, API v2.0, Component
> v1.6.4) slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Package: Open MPI root_at_bwslv02 Distribution rsh (MCA v2.0, API v2.0,
> Component v1.6.4) rsh (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open MPI: 1.6.4 default (MCA v2.0, API v2.0, Component v1.6.4)
> default (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open MPI SVN revision: r28081 env (MCA v2.0, API v2.0, Component
> v1.6.4) env (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open MPI release date: Feb 19, 2013 hnp (MCA v2.0, API v2.0,
> Component v1.6.4) hnp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open RTE: 1.6.4 singleton (MCA v2.0, API v2.0, Component v1.6.4)
> singleton (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open RTE SVN revision: r28081 slave (MCA v2.0, API v2.0, Component
> v1.6.4) slave (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Open RTE release date: Feb 19, 2013 slurm (MCA v2.0, API v2.0,
> Component v1.6.4) slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> OPAL: 1.6.4 slurmd (MCA v2.0, API v2.0, Component v1.6.4) slurmd
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> OPAL SVN revision: r28081 tool (MCA v2.0, API v2.0, Component v1.6.4)
> tool (MCA v2.0, API v2.0, Component v1.6.4)
> >>> OPAL release date: Feb 19, 2013 bad (MCA v2.0, API v2.0, Component
> v1.6.4) bad (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MPI API: 2.1 basic (MCA v2.0, API v2.0, Component v1.6.4) basic (MCA
> v2.0, API v2.0, Component v1.6.4)
> >>> Ident string: 1.6.4 hier (MCA v2.0, API v2.0, Component v1.6.4) hier
> (MCA v2.0, API v2.0, Component v1.6.4)
> >>> Prefix: /usr/local command (MCA v2.0, API v1.0, Component v1.6.4)
> command (MCA v2.0, API v1.0, Component v1.6.4)
> >>> Configured architecture: x86_64-unknown-linux-gnu syslog (MCA v2.0,
> API v1.0, Component v1.6.4) syslog (MCA v2.0, API v1.0, Component v1.6.4)
> >>> Configure host: bwslv02
> >>> Configured by: root
> >>> Configured on: Wed May 8 20:56:29 JST 2013
> >>> Configure host: bwslv02
> >>> Built by: root
> >>> Built on: Wed May 8 21:05:38 JST 2013
> >>> Built host: bwslv02
> >>> C bindings: yes
> >>> C++ bindings: yes
> >>> Fortran77 bindings: yes (all)
> >>> Fortran90 bindings: yes
> >>> Fortran90 bindings size: small
> >>> C compiler: gcc
> >>> C compiler absolute: /usr/bin/gcc
> >>> C compiler family name: GNU
> >>> C compiler version: 4.4.7
> >>> C++ compiler: g++
> >>> C++ compiler absolute: /usr/bin/g++
> >>> Fortran77 compiler: gfortran
> >>> Fortran77 compiler abs: /usr/bin/gfortran
> >>> Fortran90 compiler: gfortran
> >>> Fortran90 compiler abs: /usr/bin/gfortran
> >>> C profiling: yes
> >>> C++ profiling: yes
> >>> Fortran77 profiling: yes
> >>> Fortran90 profiling: yes
> >>> C++ exceptions: no
> >>> Thread support: posix (MPI_THREAD_MULTIPLE: no, progress: no)
> >>> Sparse Groups: no
> >>> Internal debug support: no
> >>> MPI interface warnings: no
> >>> MPI parameter check: runtime
> >>> Memory profiling support: no
> >>> Memory debugging support: no
> >>> libltdl support: yes
> >>> Heterogeneous support: no
> >>> mpirun default --prefix: no
> >>> MPI I/O support: yes
> >>> MPI_WTIME support: gettimeofday
> >>> Symbol vis. support: yes
> >>> Host topology support: yes
> >>> MPI extensions: affinity example
> >>> FT Checkpoint support: no (checkpoint thread: no)
> >>> VampirTrace support: yes
> >>> MPI_MAX_PROCESSOR_NAME: 256
> >>> MPI_MAX_ERROR_STRING: 256
> >>> MPI_MAX_OBJECT_NAME: 64
> >>> MPI_MAX_INFO_KEY: 36
> >>> MPI_MAX_INFO_VAL: 256
> >>> MPI_MAX_PORT_NAME: 1024
> >>> MPI_MAX_DATAREP_STRING: 128
> >>> MCA backtrace: execinfo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA memory: linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA paffinity: hwloc (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA carto: auto_detect (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA carto: file (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA shmem: mmap (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA shmem: posix (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA shmem: sysv (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA maffinity: first_use (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA maffinity: hwloc (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA timer: linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA installdirs: env (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA installdirs: config (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA sysinfo: linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA hwloc: hwloc132 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA dpm: orte (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pubsub: orte (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA allocator: basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA allocator: bucket (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: hierarch (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: inter (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: self (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: sync (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: tuned (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA io: romio (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA mpool: fake (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA mpool: rdma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA mpool: sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: bfo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: csum (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: ob1 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: v (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA bml: r2 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rcache: vma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA btl: self (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA btl: sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA btl: tcp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA topo: unity (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA osc: pt2pt (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA osc: rdma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA iof: hnp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA iof: orted (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA iof: tool (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA oob: tcp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA odls: default (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ras: cm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ras: loadleveler (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ras: slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: load_balance (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: rank_file (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: resilient (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: round_robin (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: seq (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: topo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rml: oob (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: binomial (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: cm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: direct (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: linear (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: radix (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: slave (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA plm: rsh (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA plm: slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA filem: rsh (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA errmgr: default (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: env (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: hnp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: singleton (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: slave (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: slurmd (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: tool (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA grpcomm: bad (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA grpcomm: basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA grpcomm: hier (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA notifier: command (MCA v2.0, API v1.0, Component v1.6.4)
> >>> MCA notifier: syslog (MCA v2.0, API v1.0, Component v1.6.4)
> >>> MCA backtrace: execinfo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA memory: linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA paffinity: hwloc (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA carto: auto_detect (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA carto: file (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA shmem: mmap (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA shmem: posix (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA shmem: sysv (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA maffinity: first_use (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA maffinity: hwloc (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA timer: linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA installdirs: env (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA installdirs: config (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA sysinfo: linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA hwloc: hwloc132 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA dpm: orte (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pubsub: orte (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA allocator: basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA allocator: bucket (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: hierarch (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: inter (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: self (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: sync (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: tuned (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA io: romio (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA mpool: fake (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA mpool: rdma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA mpool: sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: bfo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: csum (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: ob1 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: v (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA bml: r2 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rcache: vma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA btl: self (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA btl: sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA btl: tcp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA topo: unity (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA osc: pt2pt (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA osc: rdma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA iof: hnp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA iof: orted (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA iof: tool (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA oob: tcp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA odls: default (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ras: cm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ras: loadleveler (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ras: slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: load_balance (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: rank_file (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: resilient (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: round_robin (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: seq (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: topo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rml: oob (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: binomial (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: cm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: direct (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: linear (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: radix (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: slave (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA plm: rsh (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA plm: slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA filem: rsh (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA errmgr: default (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: env (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: hnp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: singleton (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: slave (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: slurmd (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: tool (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA grpcomm: bad (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA grpcomm: basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA grpcomm: hier (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA notifier: command (MCA v2.0, API v1.0, Component v1.6.4)
> >>> MCA notifier: syslog (MCA v2.0, API v1.0, Component v1.6.4)
> >>> MCA backtrace: execinfo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA memory: linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA paffinity: hwloc (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA carto: auto_detect (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA carto: file (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA shmem: mmap (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA shmem: posix (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA shmem: sysv (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA maffinity: first_use (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA maffinity: hwloc (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA timer: linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA installdirs: env (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA installdirs: config (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA sysinfo: linux (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA hwloc: hwloc132 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA dpm: orte (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pubsub: orte (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA allocator: basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA allocator: bucket (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: hierarch (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: inter (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: self (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: sync (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA coll: tuned (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA io: romio (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA mpool: fake (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA mpool: rdma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA mpool: sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: bfo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: csum (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: ob1 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA pml: v (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA bml: r2 (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rcache: vma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA btl: self (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA btl: sm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA btl: tcp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA topo: unity (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA osc: pt2pt (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA osc: rdma (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA iof: hnp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA iof: orted (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA iof: tool (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA oob: tcp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA odls: default (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ras: cm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ras: loadleveler (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ras: slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: load_balance (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: rank_file (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: resilient (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: round_robin (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: seq (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rmaps: topo (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA rml: oob (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: binomial (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: cm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: direct (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: linear (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: radix (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA routed: slave (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA plm: rsh (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA plm: slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA filem: rsh (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA errmgr: default (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: env (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: hnp (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: singleton (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: slave (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: slurm (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: slurmd (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA ess: tool (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA grpcomm: bad (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA grpcomm: basic (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA grpcomm: hier (MCA v2.0, API v2.0, Component v1.6.4)
> >>> MCA notifier: command (MCA v2.0, API v1.0, Component v1.6.4)
> >>> MCA notifier: syslog (MCA v2.0, API v1.0, Component v1.6.4)
> >>>
> >>>
> >>>
> >>>
> >>> (2013/05/16 9:12), Jeff Squyres (jsquyres) wrote:
> >>>> I am unable to replicate your error -- 1.6.4 has MPI_REDUCE defined
> on MPI_SUM properly.
> >>>>
> >>>> Are you absolutely sure you're using OMPI 1.6.4 on all nodes?
> >>>>
> >>>> Try this:
> >>>>
> >>>> mpirun ... ompi_info
> >>>>
> >>>> (insert whatever hostfile and -np value you're using for your fortran
> test) and see what is reported as the OMPI version from other nodes.
> >>>>
> >>>>
> >>>> On May 15, 2013, at 7:46 AM, Hayato KUNIIE <kuni255_at_[hidden]>
> wrote:
> >>>>
> >>>>> I using Ver, 1.6.4 in all nodes.
> >>>>>
> >>>>> (2013/05/15 7:10), Jeff Squyres (jsquyres) wrote:
> >>>>>> Are you sure that you have exactly the same version of Open MPI on
> all your nodes?
> >>>>>>
> >>>>>>
> >>>>>> On May 14, 2013, at 11:39 AM, Hayato KUNIIE <
> kuni255_at_[hidden]> wrote:
> >>>>>>
> >>>>>>> Hello I'm kuni255
> >>>>>>>
> >>>>>>> I build bewulf type PC Cluster (Cent OS release 6.4). And I studing
> >>>>>>> about MPI.(Open MPI Ver.1.6.4) I tried following sample which using
> >>>>>>> MPI_REDUCE.
> >>>>>>>
> >>>>>>> Then, Error occured.
> >>>>>>>
> >>>>>>> This cluster system consist of one head node and 2 slave nodes.
> >>>>>>> And sharing home directory in head node by NFS. so Open MPI is
> installed
> >>>>>>> each nodes.
> >>>>>>>
> >>>>>>> When I test this program on only head node, program is run
> correctly.
> >>>>>>> and output result.
> >>>>>>> But When I test this program on only slave node, same error
> occured.
> >>>>>>>
> >>>>>>> Please tell me, good idea : )
> >>>>>>>
> >>>>>>> Error message
> >>>>>>> [bwslv01:30793] *** An error occurred in MPI_Reduce: the reduction
> >>>>>>> operation MPI_SUM is not defined on the MPI_INTEGER datatype
> >>>>>>> [bwslv01:30793] *** on communicator MPI_COMM_WORLD
> >>>>>>> [bwslv01:30793] *** MPI_ERR_OP: invalid reduce operation
> >>>>>>> [bwslv01:30793] *** MPI_ERRORS_ARE_FATAL: your MPI job will now
> abort
> >>>>>>>
> --------------------------------------------------------------------------
> >>>>>>> mpirun has exited due to process rank 1 with PID 30793 on
> >>>>>>> node bwslv01 exiting improperly. There are two reasons this could
> occur:
> >>>>>>>
> >>>>>>> 1. this process did not call "init" before exiting, but others in
> >>>>>>> the job did. This can cause a job to hang indefinitely while it
> waits
> >>>>>>> for all processes to call "init". By rule, if one process calls
> "init",
> >>>>>>> then ALL processes must call "init" prior to termination.
> >>>>>>>
> >>>>>>> 2. this process called "init", but exited without calling
> "finalize".
> >>>>>>> By rule, all processes that call "init" MUST call "finalize" prior
> to
> >>>>>>> exiting or it will be considered an "abnormal termination"
> >>>>>>>
> >>>>>>> This may have caused other processes in the application to be
> >>>>>>> terminated by signals sent by mpirun (as reported here).
> >>>>>>>
> --------------------------------------------------------------------------
> >>>>>>> [bwhead.clnet:02147] 1 more process has sent help message
> >>>>>>> help-mpi-errors.txt / mpi_errors_are_fatal
> >>>>>>> [bwhead.clnet:02147] Set MCA parameter "orte_base_help_aggregate"
> to 0
> >>>>>>> to see all help / error messages
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Fortran90 source code
> >>>>>>> include 'mpif.h'
> >>>>>>> parameter(nmax=12)
> >>>>>>> integer n(nmax)
> >>>>>>>
> >>>>>>> call mpi_init(ierr)
> >>>>>>> call mpi_comm_size(MPI_COMM_WORLD, isize, ierr)
> >>>>>>> call mpi_comm_rank(MPI_COMM_WORLD, irank, ierr)
> >>>>>>> ista=irank*(nmax/isize) + 1
> >>>>>>> iend=ista+(nmax/isize-1)
> >>>>>>> isum=0
> >>>>>>> do i=1,nmax
> >>>>>>> n(i) = i
> >>>>>>> isum = isum + n(i)
> >>>>>>> end do
> >>>>>>> call mpi_reduce(isum, itmp, 1, MPI_INTEGER, MPI_SUM,
> >>>>>>> & 0, MPI_COMM_WORLD, ierr)
> >>>>>>>
> >>>>>>> if (irank == 0) then
> >>>>>>> isum=itmp
> >>>>>>> WRITE(*,*) isum
> >>>>>>> endif
> >>>>>>> call mpi_finalize(ierr)
> >>>>>>> end
> >>>>>>> _______________________________________________
> >>>>>>> users mailing list
> >>>>>>> users_at_[hidden]
> >>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
> >>>>> _______________________________________________
> >>>>> users mailing list
> >>>>> users_at_[hidden]
> >>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
> >>> _______________________________________________
> >>> users mailing list
> >>> users_at_[hidden]
> >>> http://www.open-mpi.org/mailman/listinfo.cgi/users
> >>
> >
> >
> > <ompiReport.tar.xz>_______________________________________________
> > users mailing list
> > users_at_[hidden]
> > http://www.open-mpi.org/mailman/listinfo.cgi/users
>
>
> --
> Jeff Squyres
> jsquyres_at_[hidden]
> For corporate legal information go to:
> http://www.cisco.com/web/about/doing_business/legal/cri/
>
>
> _______________________________________________
> users mailing list
> users_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/users