Open MPI logo

Open MPI User's Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Open MPI User's mailing list

Subject: Re: [OMPI users] OMPI 1.6.3, InfiniBand and MTL MXM; unable to make it work!
From: Alina Sklarevich (alinas_at_[hidden])
Date: 2013-01-23 04:28:13


Hello Francesco,

Please download and install MOFED from:
http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
(the one that matches to your OS)

Then MXM will be compatible to your OS.

Thanks,
Alina.

On Mon, Jan 21, 2013 at 5:00 PM, Francesco Simula <
francesco.simula_at_[hidden]> wrote:

> **
>
> Hi Mike,
>
> that is a question I'm not sure I can answer, because I didn't install the
> OFED package; looking for it on the OpenFabrics.org site I see that the
> archive contains the packages that in my distro come one by one, e.g.
> 'libmthca-1.0.5-6.el5.rpm', 'libmlx4-1.0.1-7.el5.rpm', etc.
>
> The complete list of packages that I was instructed to install to make the
> IB HCAs work under Centos/Red Hat is here:
>
> http://people.redhat.com/dledford/infiniband_get_started.html
>
> Taking for example the 'libmthca' package, the version is 1.0.5, the same
> as 'libmthca-1.0.5-0.1-gbe5eef3.src.rpm' source package inside
> 'OFED-3.5-rc5.tgz' from the OpenFabrics site; on the other hand, the
> 'libibmad' package for Centos 5.8 is version 1.3.3, not matching with
> 'libibmad-1.3.9-1.src.rpm' inside the tarball.
>
> Do you think I should erase the relevant packages and instead rely on a
> completely recompiled OFED? As a desperate measure I will, but I understood
> that usage of OMPI 1.6.3 with MXM was not needing this...
>
>
>
> Best regards,
>
> Francesco
>
>
>
> Il 2013-01-19 20:06 Mike Dubman ha scritto:
>
> Also, what MOFED/OFED version do you have?
> MXM is compiled per OFED/MOFED version, is there match between active ofed
> and mxm.rpm selected?
>
> On Thu, Jan 17, 2013 at 4:09 PM, Francesco Simula <
> francesco.simula_at_[hidden]> wrote:
>
>> I tried building from OMPI 1.6.3 tarball with the following ./configure:
>> ./configure --prefix=/apotto/home1/homedirs/fsimula/Lavoro/openmpi-1.6.3/install/
>> \
>> --disable-mpi-io \
>> --disable-io-romio \
>> --enable-dependency-tracking \
>> --without-slurm \
>> --with-platform=optimized \
>> --disable-mpi-f77 \
>> --disable-mpi-f90 \
>> --with-openib \
>> --disable-static \
>> --enable-shared \
>> --disable-vt \
>> --enable-pty-support \
>> --enable-mca-no-build=btl-ofud,pml-bfo \
>> --with-mxm=/opt/mellanox/mxm \
>> --with-mxm-libdir=/opt/mellanox/mxm/lib
>>
>> As you can see from the last two lines, I want to enable the MXM
>> transport layer on a cluster made of SuperMicro X8DTG-D boards with dual
>> Xeons and Mellanox MT26428 HCAs; the OS is CentOS 5.8.
>>
>> I tried with two different .rpm's for MXM, either
>> 'mxm-1.1.ad085ef-1.x86_64-centos5u7.rpm' taken from here:
>> http://www.mellanox.com/downloads/hpc/mxm/v1.1/mxm-latest.tar
>>
>> and 'mxm-1.5.f583875-1.x86_64-centos5u7.rpm' taken from here:
>> http://www.mellanox.com/downloads/hpc/mxm/v1.5/mxm-latest.tar
>>
>> With both, even if the compilation concludes successfully, a simple test
>> (osu_bw from the OSU Micro-Benchmarks 3.8) fails with the sort of message
>> reported below; the lines:
>>
>> rdma_dev.c:122 MXM DEBUG Port 1 on mlx4_0 has a link layer different
>> from IB. Skipping it
>> rdma_dev.c:155 MXM ERROR An active IB port on a Mellanox device, with
>> lid [any] gid [any] not found
>>
>> make it seem like it cannot access the HW for the HCA: is that so? The
>> very same test works when using '-mca pml ob1' (thus using the openib BTL).
>>
>> I'm quite ready to start pulling my hair; any suggestions?
>>
>> The output of /usr/bin/ibv_devinfo for the two cluster nodes follows:
>> [cut]
>> hca_id: mlx4_0
>> transport: InfiniBand (0)
>> fw_ver: 2.7.000
>> node_guid: 0025:90ff:ff07:0ac4
>> sys_image_guid: 0025:90ff:ff07:0ac7
>> vendor_id: 0x02c9
>> vendor_part_id: 26428
>> hw_ver: 0xB0
>> board_id: SM_1061000001000
>> phys_port_cnt: 1
>> port: 1
>> state: PORT_ACTIVE (4)
>> max_mtu: 2048 (4)
>> active_mtu: 2048 (4)
>> sm_lid: 4
>> port_lid: 6
>> port_lmc: 0x00
>> [/cut]
>>
>> [cut]
>> hca_id: mlx4_0
>> transport: InfiniBand (0)
>> fw_ver: 2.7.000
>> node_guid: 0025:90ff:ff07:0acc
>> sys_image_guid: 0025:90ff:ff07:0acf
>> vendor_id: 0x02c9
>> vendor_part_id: 26428
>> hw_ver: 0xB0
>> board_id: SM_1061000001000
>> phys_port_cnt: 1
>> port: 1
>> state: PORT_ACTIVE (4)
>> max_mtu: 2048 (4)
>> active_mtu: 2048 (4)
>> sm_lid: 4
>> port_lid: 8
>> port_lmc: 0x00
>> [/cut]
>>
>> The complete output of the failing test follows:
>>
>> [fsimula_at_agape5 osu-micro-benchmarks-3.8]$ mpirun -x MXM_LOG_LEVEL=poll
>> -mca pml cm -mca mtl_mxm_np 1 -np 2 -host agape4,agape5
>> install/libexec/osu-micro-benchmarks/mpi/pt2pt/osu_bw H H
>> [1358430343.266782] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> [1358430343.266815] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_HANDLE_ERRORS=bt
>> [1358430343.266826] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_GDB_PATH=/usr/bin/gdb
>> [1358430343.266838] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_DUMP_SIGNO=1
>> [1358430343.266851] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_DUMP_LEVEL=conn
>> [1358430343.266924] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_ASYNC_MODE=THREAD
>> [1358430343.266936] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_TIME_ACCURACY=0.1
>> [1358430343.266956] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_PTLS=self,shm,rdma
>> [1358430343.267249] [agape5:8596 :0] mpool.c:265 MXM DEBUG mpool
>> 'ptl_self_recv_ev': allocated chunk 0xc075f40 of 96016 bytes with 1000
>> elements
>> [1358430343.267308] [agape5:8596 :0] mpool.c:156 MXM DEBUG mpool
>> 'ptl_self_recv_ev': align 16, maxelems 1000, elemsize 88, padding 8
>> [1358430343.267316] [agape5:8596 :0] self.c:410 MXM DEBUG Created
>> ptl_self
>> [1358430343.267333] [agape5:8596 :0] shm_ptl.c:56 MXM DEBUG Created
>> ptl_shm
>> [1358430343.268457] [agape5:8596 :0] rdma_ptl.c:65 MXM TRACE Got 1 IB
>> devices
>> [1358430343.268640] [agape5:8596 :0] rdma_ptl.c:112 MXM DEBUG added
>> device mlx4_0
>> [1358430343.268665] [agape5:8596 :0] memreg.c:187 MXM TRACE Created
>> memory registration cache on 1 devices
>> [1358430343.268676] [agape5:8596 :0] rdma_ptl.c:133 MXM DEBUG Created
>> ptl_rdma
>> [1358430343.268689] [agape5:8596 :0] event.c:353 MXM FUNC
>> mxm_event_init(event=0x2b73e0ee3038 mode=2 time_accuracy=160000000)
>> [1358430343.268698] [agape5:8596 :0] timerq.c:55 MXM FUNC
>> mxm_timerq_init(timerq=0x2b73e0ee3060 accuracy=160000000
>> max_interval=1600000000)
>> [1358430343.268706] [agape5:8596 :0] event.c:292 MXM FUNC
>> mxm_event_add_thread_context(thread=0x2b73e0ee30d0)
>> [1358430343.268732] [agape5:8596 :0] event.c:198 MXM FUNC
>> mxm_set_fd_nonblock(fd=10)
>> [1358430343.268741] [agape5:8596 :0] event.c:198 MXM FUNC
>> mxm_set_fd_nonblock(fd=11)
>> [1358430343.268841] [agape5:8596 :0] mxm.c:162 MXM INFO context
>> 0x2b73e0ee3010 created
>> [1358430343.269090] [agape5:8596 :1] event.c:41 MXM FUNC
>> __call_handler(handler->cb=0x2b73e0ab28a0 handler->arg=0x2b73e0ee3038)
>> [1358430343.269104] [agape5:8596 :1] timerq.c:88 MXM FUNC
>> mxm_timerq_sweep(timerq=0x2b73e0ee3060 current_time=568595527963578)
>> [1358430343.274685] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_ENABLE_HUGETLB=1
>> [1358430343.274700] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_ENABLE_TIMEOUTS=y
>> [1358430343.274709] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_ACK_TIMEOUT=0.3
>> [1358430343.274721] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_POLL_INTERVAL=0.1
>> [1358430343.274742] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_WINDOW_SIZE=512
>> [1358430343.274755] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_TX_BATCH=1
>> [1358430343.274764] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_CQ_MODERATION=64
>> [1358430343.274773] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_DRAIN_CQ=n
>> [1358430343.274782] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_RNDV_THRESH=65536
>> [1358430343.274791] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_ZCOPY_THRESH=2040
>> [1358430343.274815] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_RESIZE_CQ=y
>> [1358430343.274826] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_UD_MTU=65536
>> [1358430343.274836] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_UD_RX_QUEUE_LEN=16000
>> [1358430343.274849] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_UD_TX_QUEUE_LEN=64
>> [1358430343.274859] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_UD_RX_MAX_BUFFERS=128000
>> [1358430343.274877] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_UD_TX_MAX_BUFFERS=8192
>> [1358430343.274887] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_UD_RX_DROP_RATE=0
>> [1358430343.274896] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_UD_ENABLE_NAK=y
>> [1358430343.274904] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_UD_RX_FILL_THRESH=0.6
>> [1358430343.274915] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_UD_TX_MAX_INLINE=128
>> [1358430343.274925] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_SHM_RX_MAX_BUFFERS=2000
>> [1358430343.274941] [agape5:8596 :0] config_parser.c:168 MXM DEBUG
>> default: MXM_RDMA_ALLOC=1
>> [1358430343.274968] [agape5:8596 :0] ep.c:36 MXM FUNC
>> mxm_ep_create(context=0x2b73e0ee3010)
>> [1358430343.274984] [agape5:8596 :0] self.c:380 MXM DEBUG Created
>> ptl_self EP(rank=3767085072)
>> [1358430343.275028] [agape5:8596 :0] shm_queue.c:230 MXM DEBUG shm_ep=0,
>> shmid=6815750
>> [1358430343.275072] [agape5:8596 :0] mpool.c:265 MXM DEBUG mpool
>> 'shm_ep_recv': allocated chunk 0x2aaaadd0c010 of 65824016 bytes with 2000
>> elements
>> [1358430343.278550] [agape5:8596 :0] mpool.c:156 MXM DEBUG mpool
>> 'shm_ep_recv': align 16, maxelems 2000, elemsize 32904, padding 8
>> [1358430343.278584] [agape5:8596 :0] timerq.c:139 MXM FUNC
>> mxm_timer_schedule(timerq=0x2b73e0ee3060 timer=0xc029538
>> expiration=568595550657300)
>> [1358430343.278594] [agape5:8596 :0] timerq.c:43 MXM FUNC
>> mxm_timerq_insert_timer(put timer 0xc029538 expiration 568595550657300 in
>> slot 10)
>> [1358430343.278608] [agape5:8596 :0] timerq.c:145 MXM TRACE added
>> timer 0xc029538 expiration 568595550657300 interval 160000000
>> [1358430343.278617] [agape5:8596 :0] shm_ep.c:176 MXM DEBUG Created
>> ptl_shm EP (rank=0, ctx_id=1)
>> [1358430343.278641] [agape5:8596 :0] rdma_ep.c:317 MXM FUNC
>> mxm_rdma_ep_create()
>> [1358430343.278722] [agape5:8596 :0] rdma_dev.c:194 MXM FUNC
>> mxm_rdma_dev_init(dev=0xc0b3f00)
>> [1358430343.278924] [agape5:8596 :0] rdma_dev.c:122 MXM DEBUG Port 1 on
>> mlx4_0 has a link layer different from IB. Skipping it
>> [1358430343.278939] [agape5:8596 :0] rdma_dev.c:155 MXM ERROR An active
>> IB port on a Mellanox device, with lid [any] gid [any] not found
>> [1358430343.278954] [agape5:8596 :0] timerq.c:150 MXM FUNC
>> mxm_timer_cancel(timerq=0x2b73e0ee3060 timer=0xc029538)
>> [1358430343.279454] [agape5:8596 :0] mpool.c:184 MXM DEBUG mpool
>> 'shm_ep_recv': destroyed
>> [1358430343.279466] [agape5:8596 :0] self.c:287 MXM FUNC
>> mxm_self_ep_destroy(ep=0xc094600)
>> ------------------------------------------------------------
>> --------------
>> MXM was unable to create an endpoint. Please make sure that the network
>> link is
>> active on the node and the hardware is functioning.
>>
>> Error: No such device
>>
>> ------------------------------------------------------------
>> --------------
>> [1358430343.287336] [agape5:8596 :0] event.c:400 MXM FUNC
>> mxm_event_cleanup(event=0x2b73e0ee3038)
>> [1358430343.287348] [agape5:8596 :0] event.c:338 MXM FUNC
>> mxm_event_remove_thread_context(thread=0x2b73e0ee30d0)
>> [1358430343.287355] [agape5:8596 :0] event.c:145 MXM FUNC
>> mxm_event_thread_wakeup()
>> [1358430343.371011] [agape5:8596 :0] timerq.c:76 MXM FUNC
>> mxm_timerq_cleanup(timerq=0x2b73e0ee3060)
>> [1358430343.371030] [agape5:8596 :0] memreg.c:194 MXM TRACE
>> Destroying memory registration cache
>> [1358430343.371129] [agape5:8596 :0] shm_ptl.c:34 MXM FUNC
>> ptl_shm_destroy(ptl=0xc0729b0)
>> [1358430343.371139] [agape5:8596 :0] self.c:340 MXM FUNC
>> mxm_self_destroy(ptl=0xc0699a0)
>> [1358430343.371148] [agape5:8596 :0] mpool.c:184 MXM DEBUG mpool
>> 'ptl_self_recv_ev': destroyed
>> [1358430343.371156] [agape5:8596 :0] mxm.c:197 MXM INFO context
>> 0x2b73e0ee3010 destroyed
>> ------------------------------------------------------------
>> --------------
>> No available pml components were found!
>>
>> This means that there are no components of this type installed on your
>> system or all the components reported that they could not be used.
>>
>> This is a fatal error; your MPI process is likely to abort. Check the
>> output of the "ompi_info" command and ensure that components of this
>> type are available on your system. You may also wish to check the
>> value of the "component_path" MCA parameter and ensure that it has at
>> least one directory that contains valid MCA components.
>> ------------------------------------------------------------
>> --------------
>> [agape5:08596] PML cm cannot be selected
>> ------------------------------------------------------------
>> --------------
>> mpirun has exited due to process rank 1 with PID 8596 on
>> node agape5 exiting improperly. There are two reasons this could occur:
>>
>> 1. this process did not call "init" before exiting, but others in
>> the job did. This can cause a job to hang indefinitely while it waits
>> for all processes to call "init". By rule, if one process calls "init",
>> then ALL processes must call "init" prior to termination.
>>
>> 2. this process called "init", but exited without calling "finalize".
>> By rule, all processes that call "init" MUST call "finalize" prior to
>> exiting or it will be considered an "abnormal termination"
>>
>> This may have caused other processes in the application to be
>> terminated by signals sent by mpirun (as reported here).
>> ------------------------------------------------------------
>> --------------
>>
>> Regards,
>> Francesco
>>
>> _______________________________________________
>> users mailing list
>> users_at_[hidden]
>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>
>
> _______________________________________________
> users mailing list
> users_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/users
>