Open MPI logo

Open MPI User's Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Open MPI User's mailing list

Subject: Re: [OMPI users] no allocated resources for the application........(mpirun)
From: Mouhamad Al-Sayed-Ali (Mouhamad.Al-Sayed-Ali_at_[hidden])
Date: 2011-07-19 12:08:37


Hi Gus Correa,

  Thank you for your response.

  I'll check what your saying and see if it'll work.

many thanks

sincerly

Mouhamad
Gus Correa <gus_at_[hidden]> a écrit :

> Hi Mouhamad
>
> Did you check if your Open MPI setup is working with the simple
> programs in the "examples" subdirectory (connectivity_c.c,
> hello_c.c, ring_c.c)?
> This will tell you if the problem is with Open MPI or with arpege
> (whatever program arpege is).
> You can compile the examples with mpicc and run them with mpirun
> with the same hostfile that you used for arpege.
>
> Also, make sure your PATH and LD_LIBRARY_PATH point to the bin and
> lib subdirectories of your Open MPI installation.
> You can set this in your .cshrc/.bashrc file.
> See:
> http://www.open-mpi.org/faq/?category=running#adding-ompi-to-path
>
> The Open MPI FAQ are worth reading, and may help you with this and
> other problems:
> http://www.open-mpi.org/faq/
>
> Just a suggestion.
> Gus Correa
>
> Mouhamad Al-Sayed-Ali wrote:
>> Hello all,
>>
>> I have been trying to run the executable "arpege" with
>>
>> mpirun -np 2 --host file arpege
>>
>>
>> where file contains the name of the machines. But, I get the
>> following error:
>>
>> -----------------
>> --------------------------------------------------------------------------
>> There are no allocated resources for the application
>> arpege
>> that match the requested mapping:
>>
>>
>> Verify that you have mapped the allocated resources properly using the
>> --host or --hostfile specification.
>> --------------------------------------------------------------------------
>> --------------------------------------------------------------------------
>> A daemon (pid unknown) died unexpectedly on signal 1 while attempting to
>> launch so we are aborting.
>>
>> There may be more information reported by the environment (see above).
>>
>> This may be because the daemon was unable to find all the needed shared
>> libraries on the remote node. You may set your LD_LIBRARY_PATH to have the
>> location of the shared libraries on the remote nodes and this will
>> automatically be forwarded to the remote nodes.
>> --------------------------------------------------------------------------
>> --------------------------------------------------------------------------
>> mpirun noticed that the job aborted, but has no info as to the process
>> that caused that situation.
>> --------------------------------------------------------------------------
>> mpirun: clean termination accomplished
>> -----------------
>>
>>
>> Can anyone help me, please ?
>>
>>
>> Sincerly
>>
>>
>> Mouhamad Al sayed ali
>> _______________________________________________
>> users mailing list
>> users_at_[hidden]
>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>
> _______________________________________________
> users mailing list
> users_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/users
>
>