The FW version looks ok. But it may be driver issues as well. I guess that OFED 1.4.X or 1.5.x driver should be ok.
To check driver version , you may run ofed_info command.
Regards,
Pavel (Pasha) Shamis
---
Application Performance Tools Group
Computer Science and Math Division
Oak Ridge National Laboratory
Email: shamisp_at_[hidden]
On Dec 17, 2010, at 12:30 PM, Gilbert Grosdidier wrote:
> John,
>
> Thanks, more info below.
>
>
> Le 17/12/2010 17:32, John Hearns a écrit :
>> On 17 December 2010 15:47, Gilbert Grosdidier
>> <Gilbert.Grosdidier_at_[hidden]> wrote:
>>> gg= I don't know, and firmware_revs does not seem to be available.
>>> Only thing I got on a worker node was with lspci :
>> If you log into a compute node the command is /usr/sbin/ibstat
> gg= Here it is :
>
>> /usr/sbin/ibstat
> CA 'mlx4_0'
> CA type: MT26418
> Number of ports: 2
> Firmware version: 2.7.0
> Hardware version: a0
> Node GUID: 0x003048fffff036c4
> System image GUID: 0x003048fffff036c7
> Port 1:
> State: Active
> Physical state: LinkUp
> Rate: 20
> Base lid: 6611
> LMC: 0
> SM lid: 1
> Capability mask: 0x02510868
> Port GUID: 0x003048fffff036c5
> Port 2:
> State: Active
> Physical state: LinkUp
> Rate: 20
> Base lid: 6612
> LMC: 0
> SM lid: 1
> Capability mask: 0x02510868
> Port GUID: 0x003048fffff036c6
>
> Does this mean resize_cq should be available, please ?
>
> Thanks, Best, G.
>
>>
>> The firmware_revs command is on the cluster admin node, and is
>> provided by the sgi-admin-node RPM package.
>
> _______________________________________________
> users mailing list
> users_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/users
|
![[Flag]](../../../../../community/mirrors/flag-us.gif){kind=small}