Open MPI logo

Open MPI User's Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Open MPI User's mailing list

Subject: Re: [OMPI users] OFED-1.5rc1 with OpenMPI and IB
From: Stefan Kuhne (Stefan.Kuhne_at_[hidden])
Date: 2009-11-13 04:06:20


Jeff Squyres schrieb:

Hello,

> Can you submit all the information requested here:
>
> http://www.open-mpi.org/community/help/
>
OpenFabrics version: 1.5 RC1 (Download from www.openfrabrics.org)

Distro: Ubuntu 9.04 (2.6.28-11-generic)

SM: Infinicon InfinIO 9024 Switch

ibv_devinfo:
user_at_head:~$ ibv_devinfo
hca_id: mthca0
         fw_ver: 3.5.0
         node_guid: 0006:6a00:b000:476b
         sys_image_guid: 0006:6a00:b000:476e
         vendor_id: 0x02c9
         vendor_part_id: 23108
         hw_ver: 0xA1
         board_id: MT_0030000001
         phys_port_cnt: 2
                 port: 1
                         state: PORT_ACTIVE (4)
                         max_mtu: 2048 (4)
                         active_mtu: 2048 (4)
                         sm_lid: 1
                         port_lid: 2
                         port_lmc: 0x00

                 port: 2
                         state: PORT_DOWN (1)
                         max_mtu: 2048 (4)
                         active_mtu: 512 (2)
                         sm_lid: 0
                         port_lid: 0
                         port_lmc: 0x00

user_at_head:~$

ifconfig:
user_at_head:~$ ifconfig ib0
ib0 Link encap:UNSPEC Hardware Adresse
80-00-04-04-FE-80-00-00-00-00-00-00-00-00-00-00
           inet Adresse:192.168.100.207 Bcast:192.168.100.255
Maske:255.255.255.0
           inet6-Adresse: fe80::206:6a00:b000:476c/64
Gültigkeitsbereich:Verbindung
           UP BROADCAST RUNNING MULTICAST MTU:65520 Metrik:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:7 overruns:0 carrier:0
           Kollisionen:0 Sendewarteschlangenlänge:256
           RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

user_at_head:~$

ulimit -l:
user_at_head:~$ ulimit -l
64
user_at_head:~$

I hope it's what you need.

Regards,
Stefan Kuhne