Open MPI logo

Open MPI User's Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Open MPI User's mailing list

Subject: Re: [OMPI users] Linux Itanium Configure and Make Logs for 1.2.8
From: Iannetti, Anthony C. (GRC-RTB0) (Anthony.C.Iannetti_at_[hidden])
Date: 2009-02-10 02:12:35


Joe,

  I will issue the command tomorrow and try to verify this problem. Thank you for your help.

Tony

Anthony C. Iannetti, P.E.

NASA Glenn Research Center

Aeropropulsion Division, Combustion Branch

21000 Brookpark Road, MS 5-10

Cleveland, OH 44135

phone: (216)433-5586

email: Anthony.C.Iannetti_at_[hidden]

Please note: All opinions expressed in this message are my own and NOT of NASA. Only the NASA Administrator can speak on behalf of NASA.

________________________________
From: users-bounces_at_[hidden] [mailto:users-bounces_at_[hidden]] On Behalf Of Joe Griffin
Sent: Monday, February 09, 2009 6:25 PM
To: Open MPI Users
Subject: Re: [OMPI users] Linux Itanium Configure and Make Logs for 1.2.8

Tony,

My compile line with the error was the following. I believe the one you had with the error was similar:

icc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include -I../../ompi/include -I../../opal/mca/paffinity/linux/plpa/src/libplpa -I../.. \
-O3 -DNDEBUG -finline-functions -fno-strict-aliasing -restrict -MT atomic-asm.lo -MD -MP -MF .deps/atomic-asm.Tpo -c atomic-asm.S -fPIC -DPIC -o .libs/atomic-asm.o

However, your 1.2.8 output had:

icc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include -I../../ompi/include -I../.. \
-O3 -DNDEBUG -finline-functions -fno-strict-aliasing -restrict -pthread -MT asm.lo -MD -MP -MF .deps/asm.Tpo -c asm.c -fPIC -DPIC -o .libs/asm.o

If I use these options, the error goes away. Here is output from my screen:

ia64b <94> pwd
/scratch/open13/openmpi-1.3/opal/asm

ia64b <95> icc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include -I../../ompi/include -I../../opal/mca/paffinity/linux/plpa/src/libplpa -I../.. -O3 -DNDEBUG -finline-functions -fno-strict-aliasing -restrict -MT atomic-asm.lo -MD -MP -MF .deps/atomic-asm.Tpo -c atomic-asm.S -fPIC -DPIC -o .libs/atomic-asm.o
/scratch/icc777XKf.s(1) : error A2040: Unexpected token: Unary Diez Operator at: Start
/scratch/icc777XKf.s(2) : error A2040: Unexpected token: Unary Diez Operator at: Start
/scratch/icc777XKf.s(3) : error A2040: Unexpected token: Unary Diez Operator at: Start
/scratch/icc777XKf.s(4) : error A2040: Unexpected token: Unary Diez Operator at: Start
.libs/atomic-asm.o - 4 error(s), 0 warning(s)

ia64b <96> icc -DHAVE_CONFIG_H -I. -I../../opal/include -I../../orte/include -I../../ompi/include -I../.. -O3 -DNDEBUG -finline-functions -fno-strict-aliasing -restrict -pthread -MT asm.lo -MD -MP -MF .deps/asm.Tpo -c asm.c -fPIC -DPIC -o .libs/asm.o

ia64b <97> ls -l .libs/asm.o
-rw-r--r-- 1 jjg develop 472 Feb 9 16:27 .libs/asm.o

So ... for some reasons the compiler options changed. Can you please

1. cd into the .../opal/asm directory
2. Issue the BAD command I have at my prompt 95 and verify the error.
3. Issue the GOOD command I have at my prompt 96 and verify it works.

Now .. as to why the options are different .. .I don't know.

Just trying to help,
Joe

________________________________
From: users-bounces_at_[hidden] [mailto:users-bounces_at_[hidden]] On Behalf Of Iannetti, Anthony C. (GRC-RTB0)
Sent: Monday, February 09, 2009 6:10 AM
To: Open MPI Users
Subject: [OMPI users] Linux Itanium Configure and Make Logs for 1.2.8

I have attached the ./configure and make all output for version 1.2.8 as directed in the Open MPI "Getting Help" section. Hopefully, this will guide us on what is going on with the 1.3 assembler code.

Tony

Anthony C. Iannetti, P.E.

NASA Glenn Research Center

Aeropropulsion Division, Combustion Branch

21000 Brookpark Road, MS 5-10

Cleveland, OH 44135

phone: (216)433-5586

email: Anthony.C.Iannetti_at_[hidden]

Please note: All opinions expressed in this message are my own and NOT of NASA. Only the NASA Administrator can speak on behalf of NASA.