Open MPI logo

Open MPI User's Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Open MPI User's mailing list

Subject: Re: [OMPI users] OpenMPI with openib partitions
From: Lenny Verkhovsky (lenny.verkhovsky_at_[hidden])
Date: 2008-10-05 13:22:33


Hi,

you should probably use -mca tcp,self -mca btl_openib_if_include ib0.8109

Lenny.

On 10/3/08, Matt Burgess <burgess.matt_at_[hidden]> wrote:
>
> Hi,
>
>
> I'm trying to get openmpi working over openib partitions. On this cluster,
> the partition number is 0x109. The ib interfaces are pingable over the
> appropriate ib0.8109 interface:
>
> d2:/opt/openmpi-ib # ifconfig ib0.8109
> ib0.8109 Link encap:UNSPEC HWaddr
> 80-00-00-4A-FE-80-00-00-00-00-00-00-00-00-00-00
> inet addr:10.21.48.2 Bcast:10.21.255.255 Mask:255.255.0.0
> inet6 addr: fe80::202:c902:26:ca01/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:65520 Metric:1
> RX packets:16811 errors:0 dropped:0 overruns:0 frame:0
> TX packets:15848 errors:0 dropped:1 overruns:0 carrier:0
> collisions:0 txqueuelen:256
> RX bytes:102229428 (97.4 Mb) TX bytes:102324172 (97.5 Mb)
>
>
> I have tried the following:
>
> /opt/openmpi-ib/1.2.6/bin/mpirun -np 2 -machinefile machinefile -mca btl
> openib,self -mca btl_openib_max_btls 1 -mca btl_openib_ib_pkey_val 0x8109
> -mca btl_openib_ib_pkey_ix 1 /cluster/pallas/x86_64-ib/IMB-MPI1
>
> but I just get a RETRY EXCEEDED ERROR. Is there a MCA parameter I am
> missing?
>
> I was successful using tcp only:
>
> /opt/openmpi-ib/1.2.6/bin/mpirun -np 2 -machinefile machinefile -mca btl
> tcp,self -mca btl_openib_max_btls 1 -mca btl_openib_ib_pkey_val 0x8109
> /cluster/pallas/x86_64-ib/IMB-MPI1
>
>
>
> Thanks,
> Matt Burgess
>
> _______________________________________________
> users mailing list
> users_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/users
>