Thanks Terry, I will install 1.2.7.
----- Original Message -----
From: "Terry Dontje" <Terry.Dontje_at_[hidden]>
Sent: Thursday, September 18, 2008 7:31 PM
Subject: Re: [OMPI users] Problem with MPI_Send and MPI_Recv
> Turns out you debugged the mpirun I was actually wanting you to attach to
> your program, PruebaSumaParalela.out, on both nodes and dump each of their
> Is there a reason why you are using 1.2.2 instead of 1.2.7 or something
> from the 1.3 branch? I am wondering if maybe there is some sort of bug in
> the tcp BTL that is preventing it from matching your two interfaces.
> Another thing to try is to specifically list out the interfaces you want
> to have used. I do not think this is going to help but it can't hurt
> either. I would do something like:
> mpirun -np 2 --host 10.4.5.123,edu_at_10.4.5.126 --mca mpi_preconnect_all
> 1 --prefix /usr/local -mca btl self,tcp -mca btl_tcp_if_include eth1
> Date: Thu, 18 Sep 2008 13:12:46 +0200
> From: "Sofia Aparicio Secanellas" <saparicio_at_[hidden]>
> Subject: Re: [OMPI users] Problem with MPI_Send and MPI_Recv
> To: "Open MPI Users" <users_at_[hidden]>
> Message-ID: <35BA42AA514D45239323DB9B38B4C5CE_at_aparicio1>
> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
> Hello Terry,
> Finally, I have installed dbx. I enclose a file with the result that I get
> when I type "dbx - PID of mpirun..." and then "where" on computer
> 10.4.5.123 .
> Do you have any idea what could be the problem?
> Thanks a lot!!
> users mailing list
> No virus found in this incoming message
> Checked by PC Tools AntiVirus (188.8.131.52 - 10.100.007).
No virus found in this outgoing message
Checked by PC Tools AntiVirus (184.108.40.206 - 10.100.007).