Open MPI logo

Open MPI User's Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Open MPI User's mailing list

From: Tim S. Woodall (twoodall_at_[hidden])
Date: 2005-10-31 13:39:16


Mike,

I believe was probably corrected today and should be in the
next release candidate.

Thanks,
Tim

Mike Houston wrote:
> Woops, spoke to soon. The performance quoted was not actually going
> between nodes. Actually using the network with the pinned option gives:
>
> [0,1,0][btl_mvapi_component.c:631:mca_btl_mvapi_component_progress]
> [0,1,1][btl_mvapi_component.c:631:mca_btl_mvapi_component_progress] Got
> error : VAPI_WR_FLUSH_ERR, Vendor code : 0 Frag : 0xb74a1c18Got error :
> VAPI_WR_FLUSH_ERR, Vendor code : 0 Frag : 0xb73e1720
>
> repeated many times.
>
> -Mike
>
> Mike Houston wrote:
>
>
>>That seems to work with the pinning option enabled. THANKS!
>>
>>Now I'll go back to testing my real code. I'm getting 700MB/s for
>>messages >=128KB. This is a little bit lower than MVAPICH, 10-20%, but
>>still pretty darn good. My guess is that I can play with the setting
>>more to tweak up performance. Now if I can get the tcp layer working,
>>I'm pretty much good to go.
>>
>>Any word on an SDP layer? I can probably modify the tcp layer quickly
>>to do SDP, but I thought I would ask.
>>
>>-Mike
>>
>>Tim S. Woodall wrote:
>>
>>
>>
>>
>>>Hello Mike,
>>>
>>>Mike Houston wrote:
>>>
>>>
>>>
>>>
>>>
>>>>When only sending a few messages, we get reasonably good IB performance,
>>>>~500MB/s (MVAPICH is 850MB/s). However, if I crank the number of
>>>>messages up, we drop to 3MB/s(!!!). This is with the OSU NBCL
>>>>mpi_bandwidth test. We are running Mellanox IB Gold 1.8 with 3.3.3
>>>>firmware on PCI-X (Couger) boards. Everything works with MVAPICH, but
>>>>we really need the thread support in OpenMPI.
>>>>
>>>>Ideas? I noticed there are a plethora of runtime options configurable
>>>>for mvapi. Do I need to tweak these to get performacne up?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>You might try running w/ the:
>>>
>>>mpirun -mca mpi_leave_pinned 1
>>>
>>>Which will cause mvapi port to maintain an mru cache of registrations,
>>>rather than dynamically pinning/unpinning memory.
>>>
>>>If this does not resolve the BW problems, try increasing the
>>>resources allocated to each connection:
>>>
>>>-mca btl_mvapi_rd_min 128
>>>-mca btl_mvapi_rd_max 256
>>>
>>>Also can you forward me a copy of the test code or a reference to it?
>>>
>>>Thanks,
>>>Tim
>>>_______________________________________________
>>>users mailing list
>>>users_at_[hidden]
>>>http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>
>>>
>>>
>>>
>>
>>_______________________________________________
>>users mailing list
>>users_at_[hidden]
>>http://www.open-mpi.org/mailman/listinfo.cgi/users
>>
>>
>
>
> _______________________________________________
> users mailing list
> users_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/users
>