Open MPI logo

Open MPI Development Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Development mailing list

Subject: Re: [OMPI devel] [OMPI svn] svn:open-mpi r25621
From: Ralph Castain (rhc.openmpi_at_[hidden])
Date: 2011-12-12 20:06:29


Aha, so that is how it returned! Yes, that component was removed and needs to remain gone!

Sent from my iPad

On Dec 12, 2011, at 4:06 PM, George Bosilca <bosilca_at_[hidden]> wrote:

> It got in via a commit with the following log "enable ptmalloc with using uGNI". Clearly it wasn't intended to be pushed yet.
>
> george.
>
> On Dec 12, 2011, at 18:58 , Jeff Squyres wrote:
>
>> Yes, it failed to compile for me, too.
>>
>> You could have just ompi-ignored it, George. And provided a little more detail on what was broken. :-)
>>
>> Here's the compile errors that I get (RHEL 5.x, 64 bit, gcc, developer build):
>>
>> {{{
>> make[1]: Entering directory `/home/jsquyres/svn/ompi3/orte/mca/rmaps/load_balance'
>> CC rmaps_lb.lo
>> rmaps_lb.c: In function ‘switchyard’:
>> rmaps_lb.c:88:23: error: ‘struct orte_job_map_t’ has no member named ‘npernode’
>> rmaps_lb.c:91:30: error: ‘struct orte_job_map_t’ has no member named ‘nperboard’
>> rmaps_lb.c:94:30: error: ‘struct orte_job_map_t’ has no member named ‘npersocket’
>> rmaps_lb.c:111:5: error: implicit declaration of function ‘orte_rmaps_base_define_daemons’
>> rmaps_lb.c: In function ‘npernode’:
>> rmaps_lb.c:152:73: error: ‘struct orte_job_map_t’ has no member named ‘policy’
>> rmaps_lb.c:152:63: error: too few arguments to function ‘orte_rmaps_base_get_target_nodes’
>> ../../../../orte/mca/rmaps/base/rmaps_private.h:52:19: note: declared here
>> rmaps_lb.c:163:13: error: implicit declaration of function ‘orte_rmaps_base_claim_slot’
>> rmaps_lb.c:165:88: error: ‘struct orte_job_map_t’ has no member named ‘oversubscribe’
>> rmaps_lb.c:199:5: error: too few arguments to function ‘orte_rmaps_base_compute_vpids’
>> ../../../../orte/mca/rmaps/base/rmaps_private.h:65:19: note: declared here
>> rmaps_lb.c: In function ‘nperboard’:
>> rmaps_lb.c:221:20: error: ‘orte_default_num_boards’ undeclared (first use in this function)
>> rmaps_lb.c:221:20: note: each undeclared identifier is reported only once for each function it appears in
>> rmaps_lb.c:242:73: error: ‘struct orte_job_map_t’ has no member named ‘policy’
>> rmaps_lb.c:242:63: error: too few arguments to function ‘orte_rmaps_base_get_target_nodes’
>> ../../../../orte/mca/rmaps/base/rmaps_private.h:52:19: note: declared here
>> rmaps_lb.c:250:26: error: ‘orte_node_t’ has no member named ‘boards’
>> rmaps_lb.c:252:27: error: ‘orte_node_t’ has no member named ‘boards’
>> rmaps_lb.c:257:92: error: ‘struct orte_job_map_t’ has no member named ‘oversubscribe’
>> rmaps_lb.c:292:5: error: too few arguments to function ‘orte_rmaps_base_compute_vpids’
>> ../../../../orte/mca/rmaps/base/rmaps_private.h:65:19: note: declared here
>> rmaps_lb.c: In function ‘npersocket’:
>> rmaps_lb.c:315:21: error: ‘orte_default_num_sockets_per_board’ undeclared (first use in this function)
>> rmaps_lb.c:336:73: error: ‘struct orte_job_map_t’ has no member named ‘policy’
>> rmaps_lb.c:336:63: error: too few arguments to function ‘orte_rmaps_base_get_target_nodes’
>> ../../../../orte/mca/rmaps/base/rmaps_private.h:52:19: note: declared here
>> rmaps_lb.c:344:27: error: ‘orte_node_t’ has no member named ‘sockets_per_board’
>> rmaps_lb.c:346:27: error: ‘orte_node_t’ has no member named ‘boards’
>> rmaps_lb.c:348:31: error: ‘orte_node_t’ has no member named ‘sockets_per_board’
>> rmaps_lb.c:353:96: error: ‘struct orte_job_map_t’ has no member named ‘oversubscribe’
>> rmaps_lb.c:390:5: error: too few arguments to function ‘orte_rmaps_base_compute_vpids’
>> ../../../../orte/mca/rmaps/base/rmaps_private.h:65:19: note: declared here
>> rmaps_lb.c: In function ‘loadbalance’:
>> rmaps_lb.c:429:77: error: ‘struct orte_job_map_t’ has no member named ‘policy’
>> rmaps_lb.c:429:67: error: too few arguments to function ‘orte_rmaps_base_get_target_nodes’
>> ../../../../orte/mca/rmaps/base/rmaps_private.h:52:19: note: declared here
>> rmaps_lb.c:443:15: warning: assignment from incompatible pointer type
>> rmaps_lb.c:455:92: error: ‘struct orte_job_map_t’ has no member named ‘oversubscribe’
>> rmaps_lb.c:488:88: error: ‘struct orte_job_map_t’ has no member named ‘oversubscribe’
>> rmaps_lb.c:530:9: error: too few arguments to function ‘orte_rmaps_base_compute_vpids’
>> ../../../../orte/mca/rmaps/base/rmaps_private.h:65:19: note: declared here
>> make[1]: *** [rmaps_lb.lo] Error 1
>> make[1]: Leaving directory `/home/jsquyres/svn/ompi3/orte/mca/rmaps/load_balance'
>> make: *** [all-recursive] Error 1
>> [15:57] svbu-mpi:~/svn/ompi3/orte %
>> }}}
>>
>>
>>
>> On Dec 12, 2011, at 6:55 PM, George Bosilca wrote:
>>
>>> Broken !!!
>>>
>>> george.
>>>
>>> On Dec 12, 2011, at 15:52 , hjelmn_at_[hidden] wrote:
>>>
>>>> Author: hjelmn
>>>> Date: 2011-12-12 15:52:51 EST (Mon, 12 Dec 2011)
>>>> New Revision: 25621
>>>> URL: https://svn.open-mpi.org/trac/ompi/changeset/25621
>>>>
>>>> Log:
>>>> enable ptmalloc with using uGNI
>>>> Added:
>>>> trunk/orte/mca/rmaps/load_balance/
>>>> - copied from r25402, /trunk/orte/mca/rmaps/load_balance/
>>>> Text files modified:
>>>> trunk/opal/mca/memory/linux/hooks.c | 3 ++-
>>>> 1 files changed, 2 insertions(+), 1 deletions(-)
>>>>
>>>> Modified: trunk/opal/mca/memory/linux/hooks.c
>>>> ==============================================================================
>>>> --- trunk/opal/mca/memory/linux/hooks.c (original)
>>>> +++ trunk/opal/mca/memory/linux/hooks.c 2011-12-12 15:52:51 EST (Mon, 12 Dec 2011)
>>>> @@ -791,7 +791,8 @@
>>>> 0 == stat("/dev/myri7", &st) ||
>>>> 0 == stat("/dev/myri8", &st) ||
>>>> 0 == stat("/dev/myri9", &st) ||
>>>> - 0 == stat("/dev/ipath", &st)) {
>>>> + 0 == stat("/dev/ipath", &st) ||
>>>> + 0 == stat("/dev/kgni0", &st)) {
>>>> found_driver = true;
>>>> }
>>>
>>>
>>> _______________________________________________
>>> devel mailing list
>>> devel_at_[hidden]
>>> http://www.open-mpi.org/mailman/listinfo.cgi/devel
>>
>>
>> --
>> Jeff Squyres
>> jsquyres_at_[hidden]
>> For corporate legal information go to:
>> http://www.cisco.com/web/about/doing_business/legal/cri/
>>
>>
>> _______________________________________________
>> devel mailing list
>> devel_at_[hidden]
>> http://www.open-mpi.org/mailman/listinfo.cgi/devel
>
>
> _______________________________________________
> devel mailing list
> devel_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/devel