Open MPI logo

Open MPI Development Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Development mailing list

Subject: Re: [OMPI devel] [PATCH] Change the openib params file for QLogic vendor_id
From: Jeff Squyres (jsquyres_at_[hidden])
Date: 2008-08-13 14:29:00


Ok. I'll apply to all versions of OMPI (v1.2.x and trunk/v1.3).

Thanks!

On Aug 13, 2008, at 1:38 PM, Ralph Campbell wrote:

> I guess it applies to everything since there is no telling
> what kernel will be used with a given version of OpenMPI.
>
> On Wed, 2008-08-13 at 08:40 -0400, Jeff Squyres wrote:
>> Thanks for the patch. This is against the v1.2 series INI file; does
>> it also apply to "infinipath 1" in the v1.3 series INI file?
>>
>> https://svn.open-mpi.org/trac/ompi/browser/trunk/ompi/mca/btl/openib/mca-btl-openib-device-params.ini
>>
>>
>> On Aug 12, 2008, at 5:29 PM, Ralph Campbell wrote:
>>
>>> Roland noticed that the QLogic HCA driver was using the PCIe
>>> vendor ID for the ibv_query_device so the IEEE OUI value is
>>> now used. This means the config file should recognize the
>>> vendor ID value 0x1175 too.
>>>
>>> Signed-off-by: Ralph Campbell <ralph.campbell_at_[hidden]>
>>>
>>> --- ompi/mca/btl/openib/mca-btl-openib-hca-params.ini.old 2008-06-17
>>> 11:54:08.000000000 -0700
>>> +++ ompi/mca/btl/openib/mca-btl-openib-hca-params.ini 2008-08-12
>>> 14:20:07.542762000 -0700
>>> @@ -126,7 +126,7 @@ use_eager_rdma = 1
>>> mtu = 2048
>>>
>>> [QLogic InfiniPath]
>>> -vendor_id = 0x1fc1,0x1077
>>> +vendor_id = 0x1fc1,0x1077,0x1175
>>> vendor_part_id = 16,29216
>>> use_eager_rdma = 1
>>> mtu = 4096
>>>
>>>
>>> _______________________________________________
>>> devel mailing list
>>> devel_at_[hidden]
>>> http://www.open-mpi.org/mailman/listinfo.cgi/devel
>>
>>
>
> _______________________________________________
> devel mailing list
> devel_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/devel

-- 
Jeff Squyres
Cisco Systems