Open MPI logo

Open MPI Development Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Development mailing list

Subject: Re: [OMPI devel] [PATCH] Change the openib params file for QLogic vendor_id
From: Jeff Squyres (jsquyres_at_[hidden])
Date: 2008-08-13 08:40:09


Thanks for the patch. This is against the v1.2 series INI file; does
it also apply to "infinipath 1" in the v1.3 series INI file?

https://svn.open-mpi.org/trac/ompi/browser/trunk/ompi/mca/btl/openib/mca-btl-openib-device-params.ini

On Aug 12, 2008, at 5:29 PM, Ralph Campbell wrote:

> Roland noticed that the QLogic HCA driver was using the PCIe
> vendor ID for the ibv_query_device so the IEEE OUI value is
> now used. This means the config file should recognize the
> vendor ID value 0x1175 too.
>
> Signed-off-by: Ralph Campbell <ralph.campbell_at_[hidden]>
>
> --- ompi/mca/btl/openib/mca-btl-openib-hca-params.ini.old 2008-06-17
> 11:54:08.000000000 -0700
> +++ ompi/mca/btl/openib/mca-btl-openib-hca-params.ini 2008-08-12
> 14:20:07.542762000 -0700
> @@ -126,7 +126,7 @@ use_eager_rdma = 1
> mtu = 2048
>
> [QLogic InfiniPath]
> -vendor_id = 0x1fc1,0x1077
> +vendor_id = 0x1fc1,0x1077,0x1175
> vendor_part_id = 16,29216
> use_eager_rdma = 1
> mtu = 4096
>
>
> _______________________________________________
> devel mailing list
> devel_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/devel

-- 
Jeff Squyres
Cisco Systems