Open MPI logo

Open MPI Development Mailing List Archives

  |   Home   |   Support   |   FAQ   |   all Development mailing list

Subject: Re: [OMPI devel] Problem with SVN access.
From: Anton Soppelsa (anton.soppelsa_at_[hidden])
Date: 2008-08-05 11:17:02


Hi,

I finally was able to get the code. Apart setting up correctly the proxy
(that was completely a fault of mine, sorry for that), I also had to use
the https: protocol instead of the normal http:.

I don't know if this is correct (it seems it is not or the help page
should be changed), but I am very happy to have gained access to the
repository.

Thank you all.
  Anton

Jeff Squyres ha scritto:
> On Aug 5, 2008, at 3:49 AM, Anton Soppelsa wrote:
>
>> However, ping command works,
>>
>> >ping svn.open-mpi.org
>>
>> Pinging svn.open-mpi.org [129.79.247.123] with 32 bytes of data:
>>
>> Reply from 129.79.247.123: bytes=32 time=148ms TTL=52
>> Reply from 129.79.247.123: bytes=32 time=147ms TTL=52
>> Reply from 129.79.247.123: bytes=32 time=146ms TTL=52
>> Reply from 129.79.247.123: bytes=32 time=146ms TTL=52
>>
>> Ping statistics for 129.79.247.123:
>> Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
>> Approximate round trip times in milli-seconds:
>> Minimum = 146ms, Maximum = 148ms, Average = 146ms
>>
>> But the telnet command does not.
>>
>> >telnet svn.open-mpi.org 80
>> Connecting To svn.open-mpi.org...Could not open connection to the
>> host, on port
>> 80: Connect failed
>>
>> C:\Documents and Settings\soppelsa_admin>
>
>
> Check with your network administrator; it sounds like you have some
> connectivity issues.
>