From: Jeff Squyres (jsquyres_at_[hidden])
Date: 2007-09-21 15:06:27
On Sep 21, 2007, at 2:34 PM, Mohamad Chaarawi wrote:
> Attached..
>
> something to do with libumad i guess..
configure:3032: gcc -D_X86_64_ -D_SMP_ -DUSE_HEADER_CACHING -
DONE_SIDED -DMPID_USE_SEQUENCE_NUMBERS -D_SHMEM_COLL_ -I/usr/local/
ofed/include -O2 conftest.c -L/usr/local/ofed/lib64 -libverbs -
libumad -lpthread >&5
/usr/bin/ld: cannot find -libumad
Weird. I see that both MVAPICH and MVAPICH2 hard-code LIBS to
include -lumad.
What version of OFED do you have installed? I don't remember if
libumad was something new in OFED 1.2 or not (I see it installed via
OFED 1.2 but I don't have any machines left that have OFED 1.1
installed).
You may want to run it by hand and run it through MTT and compare the
config.logs -- *something* is different if it works by hand and
doesn't work via MTT...
See below.
> interesting enough, if i run mtt driectly from the head node
> (before i was submitting it as a batch job), the C test passes, but
> the configure is picking up g77 instead gfortran, which fails the
> f77 tests since gcc-4.2.0 doesn't have g77..
Looking through their two make.* scripts, you can setenv F77 in the
MPI install section to override this. This will override their hard-
coded default of g77.
Similarly, you can override their settings of -lumad by setenv'ing
your own LIBS in the MPI install section. Look at their make.*
scripts to see the values that they're setting and then set your own
override without -lumad (if that's the proper solution).
Make sense?
> Jeff Squyres wrote:
>> Yoinks. :-(
>>
>> What does the corresponding config.log say? It should contain
>> the exact error that occurred.
>>
>> This configure test is simply checking to see if the C compiler
>> works. IIRC, it's trying to compile, link, and run a trivial C
>> application (something akin to "hello world").
>>
>>
>> On Sep 21, 2007, at 1:30 PM, Mohamad Chaarawi wrote:
>>
>>
>>> Hey all,
>>>
>>> I'm trying to execute the collective bakeoff tests for OMPI,
>>> MPICH2, and
>>> MVAPICH2. OMPI and MPICH2 are working out fine, However when
>>> MVAPICH2 is
>>> configuring, it gives an error with the C compiler, pasted at
>>> the end..
>>>
>>> Note that I get the error when im running the mtt client. When i
>>> go in
>>> the scratch directory to the MVAPICH2 sources and configure it
>>> myself,
>>> with the same configure arguments that it did from config.log,
>>> it works
>>> out fine..
>>>
>>> Ive been banging my head a while now to figure this out, but i got
>>> nowhere. Probably it's some environment settings being messed up
>>> somewhere, but i don't know..
>>> If anyone has stumbled upon this before, let me know..
>>> I attached my ini file..
>>>
>>>
>>>
>>>
>>>
>>> OUT:Configuring MVAPICH2...
>>> OUT:Configuring MPICH2 version MVAPICH2-0.9.8 with
>>> --prefix=/home/mschaara/mtt-testing/scratch-coll/installs/
>>> NhjQ/ install
>>> --with-device=osu_ch3:mrail --with-rdma=gen2 --with-pm=mpd
>>> --disable-romio --without-mpe
>>> OUT:sourcing
>>> /home/mschaara/mtt-testing/scratch-coll/installs/NhjQ/src/
>>> mvapich2-0.9.8
>>> p3/src/pm/mpd/setup_pm
>>> OUT:checking for gcc... OUT:gcc
>>> OUT:checking for C compiler default output file name...
>>> OUT:configure:
>>> error: C compiler cannot create executables
>>> See `config.log' for more details.
>>> OUT:Configuring MPICH2 version MVAPICH2-0.9.8 with
>>> --prefix=/home/mschaara/mtt-testing/scratch-coll/installs/
>>> NhjQ/ install
>>> --with-device=osu_ch3:mrail --with-rdma=gen2 --with-pm=mpd
>>> --disable-romio --without-mpe
>>> sourcing
>>> /home/mschaara/mtt-testing/scratch-coll/installs/NhjQ/src/
>>> mvapich2-0.9.8
>>> p3/src/pm/mpd/setup_pm
>>> checking for gcc... gcc
>>> checking for C compiler default output file name...
>>> configure: error: C
>>> compiler cannot create executables
>>> See `config.log' for more details.
>>> OUT:Failure in configuration.
>>> Please file an error report to mvapich-discuss_at_cse.ohio-
>>> state.edu with
>>> all your log files.
>>> Command complete, exit status: 1
>>>
>>>
>>> --
>>> Mohamad Chaarawi
>>> Instructional Assistant http://www.cs.uh.edu/~mschaara
>>> Department of Computer Science University of Houston
>>> 4800 Calhoun, PGH Room 526 Houston, TX 77204, USA
>>> #===================================================================
>>> == =
>>> # Generic OMPI core performance testing template configuration
>>> #===================================================================
>>> == =
>>>
>>> [MTT]
>>> # Leave this string so that we can identify this data subset in the
>>> # database
>>> # OMPI Core: Use a "test" label until we're ready to run real
>>> results
>>> description = [testbake]
>>> #description = [2007 collective performance bakeoff]
>>> # OMPI Core: Use the "trial" flag until we're ready to run real
>>> results
>>> trial = 1
>>>
>>> # Put other values here as relevant to your environment.
>>>
>>> #-------------------------------------------------------------------
>>> -- -
>>>
>>> [Lock]
>>> # Put values here as relevant to your environment.
>>>
>>> #===================================================================
>>> == =
>>> # MPI get phase
>>> #===================================================================
>>> == =
>>>
>>> [MPI get: MVAPICH2]
>>> mpi_details = MVAPICH2
>>>
>>> module = Download
>>> download_url = http://mvapich.cse.ohio-state.edu/download/
>>> mvapich2/ mvapich2-0.9.8p3.tar.gz
>>>
>>> #===================================================================
>>> == =
>>> # Install MPI phase
>>> #===================================================================
>>> == =
>>>
>>> [MPI install: MVAPICH2]
>>> mpi_get = mvapich2
>>> save_stdout_on_success = 1
>>> merge_stdout_stderr = 0
>>> # Adjust this for your site (this is what works at Cisco).
>>> Needed to
>>> # launch in SLURM; adding this to LD_LIBRARY_PATH here propagates
>>> this
>>> # all the way through the test run phases that use this MPI install,
>>> # where the test executables will need to have this set.
>>> prepend_path = LD_LIBRARY_PATH /opt/SLURM/lib
>>>
>>> module = MVAPICH2
>>> # Adjust this to be where your OFED is installed
>>> mvapich2_setenv = OPEN_IB_HOME /usr/local/ofed
>>> mvapich2_build_script = make.mvapich2.ofa
>>> mvapich2_compiler_name = gnu
>>> mvapich2_compiler_version = &get_gcc_version()
>>> # These are needed to launch through SLURM; adjust as appropriate.
>>> mvapich2_additional_wrapper_ldflags = -L/opt/SLURM/lib
>>> mvapich2_additional_wrapper_libs = -lpmi
>>>
>>> #===================================================================
>>> == =
>>> # MPI run details
>>> #===================================================================
>>> == =
>>>
>>> [MPI Details: MVAPICH2]
>>>
>>> # Launching through SLURM. If you use mpdboot instead, you need to
>>> # ensure that multiple mpd's on the same node don't conflict (or
>>> never
>>> # happen).
>>> exec = srun @alloc@ -n &test_np() &test_executable() &test_argv()
>>>
>>> # If not using SLURM, you'll need something like this (not tested).
>>> # You may need different hostfiles for running by slot/by node.
>>> #exec = mpiexec -np &test_np() --host &hostlist() &test_executable()
>>>
>>> network = loopback,verbs,shmem
>>>
>>> # In this example, each node has 4 CPUs, so to launch "by node",
>>> just
>>> # specify that each MPI process will use 4 CPUs.
>>> alloc = &if(&eq(&test_alloc(), "node"), "-c 2", "")
>>>
>>> #===================================================================
>>> == =
>>> # Test get phase
>>> #===================================================================
>>> == =
>>>
>>> [Test get: skampi]
>>> module = SVN
>>> svn_url = https://svn.open-mpi.org/svn/ompi-tests/trunk/skampi-5.0.1
>>>
>>> #===================================================================
>>> == =
>>> # Test build phase
>>> #===================================================================
>>> == =
>>>
>>> [Test build: skampi]
>>> test_get = skampi
>>> save_stdout_on_success = 1
>>> merge_stdout_stderr = 1
>>> stderr_save_lines = 100
>>>
>>> module = Shell
>>> # Set EVERYONE_CAN_MPI_IO for HP MPI
>>> shell_build_command = <<EOT
>>> make CFLAGS="-O2 -DPRODUCE_SPARSE_OUTPUT -DEVERYONE_CAN_MPI_IO"
>>> EOT
>>>
>>> #===================================================================
>>> == =
>>> # Test Run phase
>>> #===================================================================
>>> == =
>>>
>>> [Test run: skampi]
>>> test_build = skampi
>>> pass = &and(&cmd_wifexited(), &eq(&cmd_wexitstatus(), 0))
>>> # Timeout hueristic: 10 minutes
>>> timeout = 10:00
>>> save_stdout_on_pass = 1
>>> # Ensure to leave this value as "-1", or performance results
>>> could be lost!
>>> stdout_save_lines = -1
>>> merge_stdout_stderr = 1
>>> np = &env_max_procs()
>>>
>>> argv = -i &find("mtt_.+.ski", "input_files_bakeoff")
>>>
>>> specify_module = Simple
>>> analyze_module = SKaMPI
>>>
>>> simple_pass:tests = skampi
>>>
>>> #===================================================================
>>> == =
>>> # Reporter phase
>>> #===================================================================
>>> == =
>>>
>>> [Reporter: IU database]
>>> module = MTTDatabase
>>>
>>> mttdatabase_realm = OMPI
>>> mttdatabase_url = https://www.open-mpi.org/mtt/submit/
>>> # Change this to be the username and password for your submit user.
>>> # Get this from the OMPI MTT administrator.
>>> mttdatabase_username = uh
>>> mttdatabase_password = &stringify(&cat("/home/mschaara/mtt-
>>> testing/ mtt-db-password.txt"))
>>> # Change this to be some short string identifying your cluster.
>>> mttdatabase_platform = shark
>>>
>>> mttdatabase_debug_filename = mttdb_debug_file_perf
>>> mttdatabase_keep_debug_files = 1
>>>
>>> #-------------------------------------------------------------------
>>> -- -
>>>
>>> # This is a backup reporter; it also writes results to a local text
>>> # file
>>>
>>> [Reporter: text file backup]
>>> module = TextFile
>>>
>>> textfile_filename = $phase-$section-$mpi_name-$mpi_version.txt
>>>
>>> textfile_summary_header = <<EOT
>>> Hostname: &shell("hostname")
>>> uname: &shell("uname -a")
>>> Username: &shell("who am i")
>>> EOT
>>>
>>> textfile_summary_footer =
>>> textfile_detail_header =
>>> textfile_detail_footer =
>>>
>>> textfile_textwrap = 78
>>> _______________________________________________
>>> mtt-users mailing list
>>> mtt-users_at_[hidden]
>>> http://www.open-mpi.org/mailman/listinfo.cgi/mtt-users
>>>
>>
>>
>>
>
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
>
> It was created by configure, which was
> generated by GNU Autoconf 2.59. Invocation command line was
>
> $ ./configure --prefix=/home/mschaara/mtt-testing/scratch-coll/
> installs/UvUA/install --with-device=osu_ch3:mrail --with-rdma=gen2
> --with-pm=mpd --disable-romio --without-mpe
>
> ## --------- ##
> ## Platform. ##
> ## --------- ##
>
> hostname = shark01
> uname -m = x86_64
> uname -r = 2.6.16.21-smp
> uname -s = Linux
> uname -v = #2 SMP Thu Mar 1 10:09:02 CST 2007
>
> /usr/bin/uname -p = unknown
> /bin/uname -X = unknown
>
> /bin/arch = x86_64
> /usr/bin/arch -k = unknown
> /usr/convex/getsysinfo = unknown
> hostinfo = unknown
> /bin/machine = unknown
> /usr/bin/oslevel = unknown
> /bin/universe = unknown
>
> PATH: /opt/papi-3.5.0/bin
> PATH: /home/mschaara/OpenMPI/bin
> PATH: /opt/gcc-4.2.0/bin
> PATH: /opt/SLURM/bin
> PATH: /opt/papi-3.5.0/bin
> PATH: /home/mschaara/OpenMPI/bin
> PATH: /opt/gcc-4.2.0/bin
> PATH: /opt/SLURM/bin
> PATH: /opt/papi-3.5.0/bin
> PATH: /home/mschaara/OpenMPI/bin
> PATH: /opt/gcc-4.2.0/bin
> PATH: /opt/SLURM/bin
> PATH: /home/mschaara/bin
> PATH: /usr/local/bin
> PATH: /usr/bin
> PATH: /usr/X11R6/bin
> PATH: /bin
> PATH: /usr/games
> PATH: /opt/bin
> PATH: /opt/gnome/bin
> PATH: /opt/kde3/bin
> PATH: /usr/lib64/jvm/jre/bin
> PATH: /opt/c3-4/
> PATH: /usr/local/ofed/bin
> PATH: /usr/lib/mit/bin
> PATH: /usr/lib/mit/sbin
> PATH: /usr/local/ofed/sbin
>
>
> ## ----------- ##
> ## Core tests. ##
> ## ----------- ##
>
> configure:2720: checking for gcc
> configure:2746: result: gcc
> configure:2990: checking for C compiler version
> configure:2993: gcc --version </dev/null >&5
> gcc (GCC) 4.2.0
> Copyright (C) 2007 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions.
> There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
> PURPOSE.
>
> configure:2996: $? = 0
> configure:2998: gcc -v </dev/null >&5
> Using built-in specs.
> Target: x86_64-unknown-linux-gnu
> Configured with: ../gcc-4.2.0/configure --prefix=/opt/gcc-4.2.0/ --
> disable-multilib --enable-languages=c,c++,fortran,java
> Thread model: posix
> gcc version 4.2.0
> configure:3001: $? = 0
> configure:3003: gcc -V </dev/null >&5
> gcc: '-V' option must have argument
> configure:3006: $? = 1
> configure:3029: checking for C compiler default output file name
> configure:3032: gcc -D_X86_64_ -D_SMP_ -DUSE_HEADER_CACHING -
> DONE_SIDED -DMPID_USE_SEQUENCE_NUMBERS -D_SHMEM_COLL_ -I/usr/
> local/ofed/include -O2 conftest.c -L/usr/local/ofed/lib64 -
> libverbs -libumad -lpthread >&5
> /usr/bin/ld: cannot find -libumad
> collect2: ld returned 1 exit status
> configure:3035: $? = 1
> configure: failed program was:
> | /* confdefs.h. */
> |
> | #define PACKAGE_NAME ""
> | #define PACKAGE_TARNAME ""
> | #define PACKAGE_VERSION ""
> | #define PACKAGE_STRING ""
> | #define PACKAGE_BUGREPORT ""
> | #define HAVE_ERROR_CHECKING MPID_ERROR_LEVEL_ALL
> | #define MPICH_ERROR_MSG_LEVEL MPICH_ERROR_MSG_ALL
> | #define USE_LOGGING MPID_LOGGING_NONE
> | #define MPICH_SINGLE_THREADED 1
> | #define MPICH_THREAD_LEVEL MPI_THREAD_FUNNELED
> | #define USE_THREAD_IMPL MPICH_THREAD_IMPL_NONE
> | /* end confdefs.h. */
> |
> | int
> | main ()
> | {
> |
> | ;
> | return 0;
> | }
> configure:3074: error: C compiler cannot create executables
> See `config.log' for more details.
>
> ## ---------------- ##
> ## Cache variables. ##
> ## ---------------- ##
>
> ac_cv_env_CC_set=set
> ac_cv_env_CC_value=gcc
> ac_cv_env_CFLAGS_set=set
> ac_cv_env_CFLAGS_value='-D_X86_64_ -D_SMP_ -DUSE_HEADER_CACHING -
> DONE_SIDED -DMPID_USE_SEQUENCE_NUMBERS -D_SHMEM_COLL_ -I/usr/
> local/ofed/include -O2'
> ac_cv_env_CPPFLAGS_set=
> ac_cv_env_CPPFLAGS_value=
> ac_cv_env_CPP_set=
> ac_cv_env_CPP_value=
> ac_cv_env_CXXFLAGS_set=
> ac_cv_env_CXXFLAGS_value=
> ac_cv_env_CXX_set=set
> ac_cv_env_CXX_value=g++
> ac_cv_env_F77_set=set
> ac_cv_env_F77_value=g77
> ac_cv_env_F90FLAGS_set=
> ac_cv_env_F90FLAGS_value=
> ac_cv_env_F90_set=set
> ac_cv_env_F90_value=
> ac_cv_env_FFLAGS_set=set
> ac_cv_env_FFLAGS_value=-L/usr/local/ofed/lib64
> ac_cv_env_LDFLAGS_set=
> ac_cv_env_LDFLAGS_value=
> ac_cv_env_build_alias_set=
> ac_cv_env_build_alias_value=
> ac_cv_env_host_alias_set=
> ac_cv_env_host_alias_value=
> ac_cv_env_target_alias_set=
> ac_cv_env_target_alias_value=
> ac_cv_prog_ac_ct_CC=gcc
> pac_cv_my_conf_dir=/home/mschaara/mtt-testing/scratch-coll/installs/
> UvUA/src/mvapich2-0.9.8p3
>
> ## ----------------- ##
> ## Output variables. ##
> ## ----------------- ##
>
> ADDRESS_KIND=''
> ALLOCA=''
> AR=''
> BSEND_OVERHEAD=''
> BUILD_TVDLL=''
> CC='gcc'
> CC_SHL=''
> CC_SHL_DBG=''
> CFLAGS='-D_X86_64_ -D_SMP_ -DUSE_HEADER_CACHING -DONE_SIDED -
> DMPID_USE_SEQUENCE_NUMBERS -D_SHMEM_COLL_ -I/usr/local/ofed/
> include -O2'
> CONFIGURE_ARGUMENTS='--prefix=/home/mschaara/mtt-testing/scratch-
> coll/installs/UvUA/install --with-device=osu_ch3:mrail --with-
> rdma=gen2 --with-pm=mpd --disable-romio --without-mpe'
> CPP=''
> CPPFLAGS=''
> CREATESHLIB=''
> CXX='g++'
> CXXFLAGS=''
> CXX_LINKPATH_SHL=''
> CXX_SHL=''
> C_LINKPATH_SHL=''
> C_LINK_SHL=''
> C_LINK_SHL_DBG=''
> DEFS=''
> DEVICE='osu_ch3:mrail'
> DLLIMPORT=''
> DOCTEXT=''
> DOCTEXTSTYLE=''
> ECHO_C=''
> ECHO_N='-n'
> ECHO_T=''
> EGREP=''
> ENABLE_SHLIB=''
> ETAGS=''
> ETAGSADD=''
> EXAMPLE_LIBS=''
> EXEEXT=''
> EXTERNAL_SRC_DIRS=''
> EXTRA_STATUS_DECL=''
> F77='g77'
> F77CPP=''
> F77_COMPLEX16=''
> F77_COMPLEX32=''
> F77_COMPLEX8=''
> F77_INCDIR=''
> F77_INTEGER16=''
> F77_INTEGER1=''
> F77_INTEGER2=''
> F77_INTEGER4=''
> F77_INTEGER8=''
> F77_IN_C_LIBS=''
> F77_LIBDIR_LEADER=''
> F77_NAME_MANGLE=''
> F77_REAL16=''
> F77_REAL4=''
> F77_REAL8=''
> F90=''
> F90CPP=''
> F90EXT=''
> F90FLAGS=''
> F90INC=''
> F90INCFLAG=''
> F90MODEXT=''
> F90MODINCFLAG=''
> F90MODINCSPEC=''
> F90_LINKPATH_SHL=''
> F90_SHL=''
> F90_WORK_FILES_ARG=''
> FC=''
> FC_LINKPATH_SHL=''
> FC_SHL=''
> FFLAGS='-L/usr/local/ofed/lib64'
> FINCLUDES=''
> FLIBS=''
> FWRAPNAME='fmpich'
> GCC=''
> HAVE_CXX_EXCEPTIONS=''
> HAVE_ROMIO=''
> INCLUDE_MPICXX_H=''
> INSTALL_DATA=''
> INSTALL_PROGRAM=''
> INSTALL_SCRIPT=''
> INT16_T=''
> INT32_T=''
> INT64_T=''
> LDFLAGS=''
> LIBOBJS=''
> LIBS='-L/usr/local/ofed/lib64 -libverbs -libumad -lpthread'
> LIBTOOL=''
> LTLIBOBJS=''
> MAKE=''
> MAKE_DEPEND_C=''
> MANY_PM='no'
> MKDIR_P=''
> MPE_THREAD_LIB_NAME=''
> MPICC=''
> MPICH_TIMER_KIND=''
> MPICVSHOME=''
> MPICXX=''
> MPICXXLIBNAME='mpichcxx'
> MPID_TIMER_TYPE=''
> MPIF77=''
> MPIF90=''
> MPIFLIBNAME='mpich'
> MPIFPMPI=''
> MPILIBNAME='mpich'
> MPIMODNAME=''
> MPIU_DLL_SPEC_DEF=''
> MPI_2COMPLEX=''
> MPI_2DOUBLE_COMPLEX=''
> MPI_2DOUBLE_PRECISION=''
> MPI_2INT=''
> MPI_2INTEGER=''
> MPI_2REAL=''
> MPI_AINT=''
> MPI_BYTE=''
> MPI_CFLAGS=''
> MPI_CHAR=''
> MPI_CHARACTER=''
> MPI_COMPLEX16=''
> MPI_COMPLEX32=''
> MPI_COMPLEX8=''
> MPI_COMPLEX=''
> MPI_CXXFLAGS=''
> MPI_DOUBLE=''
> MPI_DOUBLE_COMPLEX=''
> MPI_DOUBLE_INT=''
> MPI_DOUBLE_PRECISION=''
> MPI_F77_BYTE=''
> MPI_F77_LB=''
> MPI_F77_PACKED=''
> MPI_F77_UB=''
> MPI_F90FLAGS='-O2'
> MPI_FFLAGS=''
> MPI_FINT=''
> MPI_FLOAT=''
> MPI_FLOAT_INT=''
> MPI_INT=''
> MPI_INTEGER16=''
> MPI_INTEGER1=''
> MPI_INTEGER2=''
> MPI_INTEGER4=''
> MPI_INTEGER8=''
> MPI_INTEGER=''
> MPI_LB=''
> MPI_LDFLAGS=''
> MPI_LOGICAL=''
> MPI_LONG=''
> MPI_LONG_DOUBLE=''
> MPI_LONG_DOUBLE_INT=''
> MPI_LONG_INT=''
> MPI_LONG_LONG=''
> MPI_MAX_PROCESSOR_NAME=''
> MPI_OFFSET=''
> MPI_OFFSET_TYPEDEF=''
> MPI_PACKED=''
> MPI_REAL16=''
> MPI_REAL4=''
> MPI_REAL8=''
> MPI_REAL=''
> MPI_SHORT=''
> MPI_SHORT_INT=''
> MPI_SIGNED_CHAR=''
> MPI_STATUS_SIZE=''
> MPI_UB=''
> MPI_UNSIGNED_CHAR=''
> MPI_UNSIGNED_INT=''
> MPI_UNSIGNED_LONG=''
> MPI_UNSIGNED_LONG_LONG=''
> MPI_UNSIGNED_SHORT=''
> MPI_WCHAR=''
> NEEDSPLIB=''
> NO_WEAK_SYM=''
> NO_WEAK_SYM_TARGET=''
> OBJEXT=''
> OFFSET_KIND=''
> PACKAGE_BUGREPORT='mpich2-maint_at_[hidden]'
> PACKAGE_NAME='MPICH2'
> PACKAGE_STRING=''
> PACKAGE_TARNAME='mpich2-MVAPICH2-0.9.8'
> PACKAGE_VERSION='MVAPICH2-0.9.8'
> PATH_SEPARATOR=':'
> PERL5=''
> PERL=''
> PMPIFLIBNAME='pmpich'
> PMPILIBNAME='pmpich'
> PROFILE_DEF_MPI=''
> RANLIB=''
> RANLIB_AFTER_INSTALL=''
> SET_CFLAGS=''
> SET_MAKE=''
> SHELL='/bin/sh'
> SHLIB_EXT=''
> SHLIB_FROM_LO=''
> SHLIB_INSTALL=''
> SIZEOF_MPI_STATUS=''
> TESTCPP=''
> THR_CFLAGS=''
> THR_CPPFLAGS=''
> THR_DEFS=''
> THR_LDFLAGS=''
> THR_LIBS=''
> VERSION='MVAPICH2-0.9.8'
> VPATH=''
> ac_ct_CC='gcc'
> ac_ct_CXX=''
> ac_ct_F77=''
> ac_ct_F90=''
> ac_ct_RANLIB=''
> bindings=''
> bindings_dirs=''
> bindir='${exec_prefix}/bin'
> build_alias=''
> datadir='${prefix}/share'
> debugger_dir=''
> device_name='osu_ch3'
> docdir='${prefix}/doc'
> exec_prefix='NONE'
> host_alias=''
> htmldir='${prefix}/www'
> includedir='${prefix}/include'
> infodir='${prefix}/info'
> libdir='${exec_prefix}/lib'
> libexecdir='${exec_prefix}/libexec'
> localstatedir='${prefix}/var'
> logging_dir=''
> logging_name='none'
> logging_subdirs=''
> mandir='${prefix}/man'
> master_top_builddir='/home/mschaara/mtt-testing/scratch-coll/
> installs/UvUA/src/mvapich2-0.9.8p3'
> master_top_srcdir='/home/mschaara/mtt-testing/scratch-coll/installs/
> UvUA/src/mvapich2-0.9.8p3'
> modincdir=''
> mpe_dir=''
> nameserv_name=''
> oldincludedir='/usr/include'
> other_install_dirs=' src/pm/mpd'
> other_pm_names=''
> pac_prog=''
> pm_name='mpd'
> pmi_name='simple'
> prefix='/home/mschaara/mtt-testing/scratch-coll/installs/UvUA/install'
> program_transform_name='s,x,x,'
> romio_dir=''
> sbindir='${exec_prefix}/sbin'
> sharedstatedir='${prefix}/com'
> subdirs=''
> subsystems=' src/pmi/simple src/pm/mpd'
> sysconfdir='${prefix}/etc'
> target_alias=''
>
> ## ------------- ##
> ## Output files. ##
> ## ------------- ##
>
> MPE_THREAD_FUNCS=''
> MPE_THREAD_TYPEDEFS=''
>
> ## ----------- ##
> ## confdefs.h. ##
> ## ----------- ##
>
> #define HAVE_ERROR_CHECKING MPID_ERROR_LEVEL_ALL
> #define MPICH_ERROR_MSG_LEVEL MPICH_ERROR_MSG_ALL
> #define MPICH_SINGLE_THREADED 1
> #define MPICH_THREAD_LEVEL MPI_THREAD_FUNNELED
> #define PACKAGE_BUGREPORT ""
> #define PACKAGE_NAME ""
> #define PACKAGE_STRING ""
> #define PACKAGE_TARNAME ""
> #define PACKAGE_VERSION ""
> #define USE_LOGGING MPID_LOGGING_NONE
> #define USE_THREAD_IMPL MPICH_THREAD_IMPL_NONE
>
> configure: exit 77
> _______________________________________________
> mtt-users mailing list
> mtt-users_at_[hidden]
> http://www.open-mpi.org/mailman/listinfo.cgi/mtt-users
-- Jeff Squyres Cisco Systems